Comparison Opel Monza A1 3.0 V6 (150 Hp) & Peugeot 405 II Break (4E) 1.4 (75 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Opel | Peugeot |
| Model: | Monza | 405 |
| Generation: | Monza A1 | 405 II Break (4E) |
| Engine / modification: | 3.0 V6 (150 Hp) | 1.4 (75 Hp) |
| Production start: | 1978 year | 1992 year |
| Production end: | 1982 year | 1996 year |
| Coupe type: | Coupe | |
| Num. of Doors: | 3 | |
| Num. of seats: | 4 | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Drag coefficient: | 0.41 | |
| Fuel tank volume: | 70 l | |
| Power: | 150 hp | 75 hp |
| Max power in: | 5200 rpm. | |
| Maximum speed: | 198 km/h | |
| Acceleration from 0 to 100 km/h: | 9.5 sec | |
| Torque: | 231 Nm/3400 rpm. | |
| Engine displacement: | 2969 cm3 | |
| Fuel System: | Carburettor | |
| Position of cylinders: | V engine | |
| Valvetrain: | SOHC | |
| Number of cylinders: | 6 | |
| Number of valves per cylinder: | 2 | |
| Compression ratio: | 9.3 | |
| Piston Stroke: | 69.8 mm | |
| Cylinder Bore: | 95 mm | |
| Number of Gears (manual transmission): | 4 | |
| Length: | 4692 mm | |
| Width: | 1734 mm | |
| Height: | 1380 mm | |
| Wheelbase: | 2668 mm | |
| Front track: | 1443 mm | |
| Rear (Back) track: | 1472 mm | |
| Ride height(clearance): | 140 mm | |
| Minimum volume of Luggage (trunk): | 425 l | |
| Maximum amount of Luggage (trunk): | 765 l | |
| Max weight: | 1900 kg | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| Kerb Weight: | 1375 kg | |
| Minimum turning circle (turning diameter): | 10.8 m | |
| Permitted trailer load with brakes (12%): | 1700 kg | |
| Permitted trailer load without brakes: | 700 kg |