Comparison Opel Manta A 1.6 S (80 Hp) & Renault Laguna III (Phase II) 1.5 dCi (110 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Opel | Renault |
| Model: | Manta | Laguna |
| Generation: | Manta A | Laguna III (Phase II) |
| Engine / modification: | 1.6 S (80 Hp) | 1.5 dCi (110 Hp) |
| Production start: | 1970 year | 2010 year |
| Production end: | 1975 year | |
| Coupe type: | Coupe | Hatchback |
| Num. of Doors: | 2 | 5 |
| Num. of seats: | 4 | 5 |
| Fuel consumption / economy - urban: | 4.9 l/100 km | |
| Fuel consumption / economy - extra urban: | 3.7 l/100 km | |
| Fuel consumption / economy - combined: | 4.2 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Diesel |
| Fuel tank volume: | 46 l | 66 l |
| Emission standard: | EURO V | |
| CO2 emissions: | 109 g/km | |
| Power: | 80 hp | 110 hp |
| Max power in: | 5200 rpm. | 4000 rpm. |
| Maximum speed: | 164 km/h | 193 km/h |
| Acceleration from 0 to 100 km/h: | 14 sec | 11.9 sec |
| Torque: | 129 Nm/4200 rpm. | 240 Nm/1750 rpm. |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 1584 cm3 | 1461 cm3 |
| Fuel System: | Carburettor | Diesel - Standard diesel injection (SDI) |
| Aspiration / Turbine: | Turbo / Intercooler (Turbocharging / Intercooler) | |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | SOHC | |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 2 | 2 |
| Compression ratio: | 9.5 | |
| Piston Stroke: | 69.8 mm | |
| Cylinder Bore: | 85 mm | |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (manual transmission): | 4 | 6 |
| Length: | 4292 mm | 4695 mm |
| Width: | 1626 mm | 1811 mm |
| Height: | 1360 mm | 1445 mm |
| Wheelbase: | 2430 mm | 2756 mm |
| Front track: | 1331 mm | 1557 mm |
| Rear (Back) track: | 1320 mm | 1512 mm |
| Minimum volume of Luggage (trunk): | 326 l | |
| Max weight: | 1310 kg | 1936 kg |
| Front brakes: | Disc | Ventilated discs |
| Rear brakes: | Drum | Disc |
| Kerb Weight: | 945 kg | 1310 kg |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 10.5 m | |
| Permitted trailer load with brakes (12%): | 1000 kg | |
| Permitted trailer load without brakes: | 500 kg |