Comparison Opel Manta A 1.6 (68 Hp) & Volvo S60 II (facelift 2013) 1.6 T4F (180 Hp) Ethanol
Add car |
Remove car |
Remove car |
| Brand: | Opel | Volvo |
| Model: | Manta | S60 |
| Generation: | Manta A | S60 II (facelift 2013) |
| Engine / modification: | 1.6 (68 Hp) | 1.6 T4F (180 Hp) Ethanol |
| Production start: | 1970 year | 2013 year |
| Production end: | 1975 year | |
| Coupe type: | Coupe | Sedan |
| Num. of Doors: | 2 | 4 |
| Num. of seats: | 4 | 5 |
| Fuel consumption / economy - combined: | 6.8/9.3 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol / Ethanol |
| Fuel tank volume: | 46 l | 67.5 l |
| CO2 emissions: | 157/152 g/km | |
| Power: | 68 hp | 180 hp |
| Max power in: | 5200 rpm. | 5700 rpm. |
| Maximum speed: | 154 km/h | 225 km/h |
| Acceleration from 0 to 100 km/h: | 17 sec | 8.3 sec |
| Torque: | 108 Nm/3400 rpm. | 240 Nm/1620-4980 rpm. |
| Model Engine: | B4164T2 | |
| Engine position: | Front, transverse | |
| Engine displacement: | 1584 cm3 | 1596 cm3 |
| Fuel System: | Carburettor | Direct injection |
| Aspiration / Turbine: | Turbocharging | |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | SOHC | DOHC |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 2 | 4 |
| Compression ratio: | 8.2 | 10 |
| Piston Stroke: | 69.8 mm | 81.4 mm |
| Cylinder Bore: | 85 mm | 79 mm |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (manual transmission): | 4 | 6 |
| Length: | 4292 mm | 4635 mm |
| Width: | 1626 mm | 1899 mm |
| Height: | 1360 mm | 1484 mm |
| Wheelbase: | 2430 mm | 2776 mm |
| Front track: | 1331 mm | 1588-1578 mm |
| Rear (Back) track: | 1320 mm | 1585-1575 mm |
| Ride height(clearance): | 136 mm | |
| Minimum volume of Luggage (trunk): | 326 l | |
| Front suspension: | Independent, Spring McPherson, with stabilizer | |
| Rear suspension: | Independent, spring | |
| Max weight: | 1295 kg | |
| Front brakes: | Disc | Ventilated discs |
| Rear brakes: | Drum | Disc |
| Kerb Weight: | 930 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 10.5 m | 11.5 m |
| Permitted trailer load with brakes (12%): | 1000 kg | |
| Permitted trailer load without brakes: | 500 kg |