Car technical specifications and fuel economy / consumption / mpg

Comparison Opel Insignia Sedan (facelift 2013) 2.0 CDTI (130 Hp) Ecotec Automatic & Opel Agila II 1.2 (94 Hp) ecoFLEX start/stop


Add car
Opel Insignia Sedan (facelift 2013) 2.0 CDTI (130 Hp) Ecotec Automatic
Remove car
Opel Agila II 1.2 (94 Hp) ecoFLEX start/stop
Remove car
Brand: Opel Opel
Model: Insignia Agila
Generation: Insignia Sedan (facelift 2013) Agila II
Engine / modification: 2.0 CDTI (130 Hp) Ecotec Automatic 1.2 (94 Hp) ecoFLEX start/stop
Production start: 2013 year 2008 year
Production end: 2014 year
Coupe type: Sedan Hatchback
Num. of Doors: 4 5
Num. of seats: 5 5
Fuel consumption / economy - urban: 7.0 l/100 km 5.9 l/100 km
Fuel consumption / economy - extra urban: 4.3 l/100 km 4.2 l/100 km
Fuel consumption / economy - combined: 5.3 l/100 km 5.0 l/100 km
Fuel Type: Diesel Petrol (Gasoline)
Fuel tank volume: 70 l
Emission standard: EURO V Euro 5
CO2 emissions: 139 g/km 115 g/km
Power: 130 hp 94 hp
Max power in: 4000 rpm. 6000 rpm.
Maximum speed: 204 km/h
Acceleration from 0 to 100 km/h: 11.2 sec
Torque: 300 Nm/1750-2500 rpm. 118 Nm @ 4800 rpm.
Model Engine: K12B
Engine position: Front, transverse Front, transverse
Engine displacement: 1956 cm3 1242 cm3
Engine oil capacity: 3.3 l
Fuel System: Diesel Commonrail Multi-point injection
Aspiration / Turbine: Turbo / Intercooler (Turbocharging / Intercooler)
Position of cylinders: Inline Inline
Number of cylinders: 4 4
Number of valves per cylinder: 4
Compression ratio: 11
Piston Stroke: 90.4 mm
Cylinder Bore: 83 mm
Wheel Drive: Front wheel drive Front wheel drive
Number of Gears (automatic transmission): 6
Number of Gears (manual transmission): 5
Length: 4842 mm 3740 mm
Width: 1856 mm 1680 mm
Width including mirrors: 2084 mm
Height: 1498 mm 1590 mm
Wheelbase: 2737 mm 2360 mm
Front track: 1587 mm 1470 mm
Rear (Back) track: 1590 mm 1480 mm
Minimum volume of Luggage (trunk): 500 l
Maximum amount of Luggage (trunk): 1015 l
ABS: yes yes
Steering type: Steering rack and pinion Steering rack and pinion
Minimum turning circle (turning diameter): 11.4 m 10 m