Car technical specifications and fuel economy / consumption / mpg

Comparison Opel Insignia Sedan (facelift 2013) 2.0 CDTI (120 Hp) Ecotec ecoFLEX start/stop & Opel Campo Single Cab 3.1 TD (109 Hp) 4x4


Add car
Opel Insignia Sedan (facelift 2013) 2.0 CDTI (120 Hp) Ecotec ecoFLEX start/stop
Remove car
Opel Campo Single Cab 3.1 TD (109 Hp) 4x4
Remove car
Brand: Opel Opel
Model: Insignia Campo
Generation: Insignia Sedan (facelift 2013) Campo Single Cab
Engine / modification: 2.0 CDTI (120 Hp) Ecotec ecoFLEX start/stop 3.1 TD (109 Hp) 4x4
Production start: 2013 year 1992 year
Production end: 2000 year
Coupe type: Sedan Pick-up
Num. of Doors: 4 2
Num. of seats: 5 2
Fuel consumption / economy - urban: 4.6 l/100 km
Fuel consumption / economy - extra urban: 3.3 l/100 km
Fuel consumption / economy - combined: 3.7 l/100 km 10.8 l/100 km
Fuel Type: Diesel Diesel
Fuel tank volume: 70 l 75 l
Emission standard: EURO V
CO2 emissions: 99 g/km
Power: 120 hp 109 hp
Max power in: 4000 rpm. 3600 rpm.
Maximum speed: 195 km/h 153 km/h
Acceleration from 0 to 100 km/h: 11.9 sec 15.3 sec
Torque: 300 Nm/1750-2500 rpm. 255 Nm/1900 rpm.
Engine position: Front, transverse Front, longitudinal
Engine displacement: 1956 cm3 3059 cm3
Fuel System: Diesel Commonrail Diesel - Standard diesel injection (SDI)
Aspiration / Turbine: Turbo / Intercooler (Turbocharging / Intercooler) Turbocharging
Position of cylinders: Inline Inline
Number of cylinders: 4 4
Number of valves per cylinder: 4
Piston Stroke: 90.4 mm
Cylinder Bore: 83 mm
Wheel Drive: Front wheel drive All wheel drive (4x4)
Number of Gears (manual transmission): 6 5
Length: 4842 mm 4980 mm
Width: 1856 mm 1690 mm
Width including mirrors: 2084 mm
Height: 1498 mm 1710 mm
Wheelbase: 2737 mm 3025 mm
Front track: 1587 mm
Rear (Back) track: 1590 mm
Minimum volume of Luggage (trunk): 500 l
Maximum amount of Luggage (trunk): 1015 l
Front suspension: Independent torsion bar, double wishbone
Front brakes: Ventilated discs
Rear brakes: Drum
ABS: yes
Steering type: Steering rack and pinion
Power steering: Hydraulic Steering
Minimum turning circle (turning diameter): 11.4 m