Comparison Opel Insignia Sedan (facelift 2013) 2.0 (220 Hp) Start/Stop & Citroen DS4 2.0 BlueHDi (180 Hp) Automatic
Add car |
Remove car |
Remove car |
| Brand: | Opel | Citroen |
| Model: | Insignia | DS4 |
| Generation: | Insignia Sedan (facelift 2013) | DS4 |
| Engine / modification: | 2.0 (220 Hp) Start/Stop | 2.0 BlueHDi (180 Hp) Automatic |
| Production start: | 2013 year | 2015 year |
| Coupe type: | Sedan | Hatchback |
| Num. of Doors: | 4 | 5 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 10.9 l/100 km | 5.2 l/100 km |
| Fuel consumption / economy - extra urban: | 5.7 l/100 km | 3.8 l/100 km |
| Fuel consumption / economy - combined: | 7.6 l/100 km | 4.3 l/100 km |
| Fuel Type: | Petrol (Gasoline) | Diesel |
| Fuel tank volume: | 70 l | 60 l |
| Emission standard: | EURO V | EURO VI |
| CO2 emissions: | 113 g/km | |
| Power: | 220 hp | 180 hp |
| Max power in: | 5300 rpm. | 3750 rpm. |
| Maximum speed: | 205 km/h | |
| Torque: | 350 Nm/2000-4000 rpm. | 400 Nm/2000 rpm. |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 1998 cm3 | 1997 cm3 |
| Fuel System: | Direct injection | Diesel Commonrail |
| Aspiration / Turbine: | Turbocharging | Turbo / Intercooler (Turbocharging / Intercooler) |
| Position of cylinders: | Inline | Inline |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 9.3 | |
| Wheel Drive: | Front wheel drive | Front wheel drive |
| Number of Gears (automatic transmission): | 6 | |
| Number of Gears (manual transmission): | 6 | |
| Length: | 4842 mm | 4275 mm |
| Width: | 1856 mm | 1810 mm |
| Width including mirrors: | 2084 mm | |
| Height: | 1498 mm | 1526 mm |
| Wheelbase: | 2737 mm | 2612 mm |
| Front track: | 1587 mm | 1531 mm |
| Rear (Back) track: | 1590 mm | 1525 mm |
| Minimum volume of Luggage (trunk): | 500 l | 385 l |
| Maximum amount of Luggage (trunk): | 1015 l | |
| Max weight: | 2020 kg | 1975 kg |
| Kerb Weight: | 1150 kg | 1495 kg |
| ABS: | yes | yes |
| Steering type: | Steering rack and pinion | Steering rack and pinion |
| Minimum turning circle (turning diameter): | 10.9 m |