Comparison Opel Insignia Sedan 2.0 Turbo (250 Hp) 4x4 & Fiat Ritmo Bertone Cabrio 85 1.5 (86 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Opel | Fiat |
| Model: | Insignia | Ritmo |
| Generation: | Insignia Sedan | Ritmo Bertone Cabrio |
| Engine / modification: | 2.0 Turbo (250 Hp) 4x4 | 85 1.5 (86 Hp) |
| Production start: | 2011 year | 1980 year |
| Production end: | 2013 year | 1989 year |
| Coupe type: | Sedan | |
| Num. of Doors: | 4 | |
| Num. of seats: | 5 | |
| Fuel consumption / economy - urban: | 12.1 l/100 km | |
| Fuel consumption / economy - extra urban: | 6.4 l/100 km | |
| Fuel consumption / economy - combined: | 8.5 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 70 l | |
| Emission standard: | EURO V | |
| CO2 emissions: | 197 g/km | |
| Power: | 250 hp | 86 hp |
| Max power in: | 5300 rpm. | |
| Maximum speed: | 250 km/h | |
| Acceleration from 0 to 100 km/h: | 7.5 sec | |
| Torque: | 400 Nm/2400-3600 rpm. | |
| Engine position: | Front, transverse | |
| Engine displacement: | 1998 cm3 | |
| Fuel System: | Multi-point injection | |
| Aspiration / Turbine: | Turbocharging | |
| Position of cylinders: | Inline | |
| Number of cylinders: | 4 | |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 9.3 | |
| Piston Stroke: | 86 mm | |
| Cylinder Bore: | 86 mm | |
| Wheel Drive: | All wheel drive (4x4) | |
| Number of Gears (manual transmission): | 6 | |
| Length: | 4830 mm | |
| Width: | 1858 mm | |
| Height: | 1498 mm | |
| Wheelbase: | 2737 mm | |
| Front track: | 1585 mm | |
| Rear (Back) track: | 1587 mm | |
| Ride height(clearance): | 160 mm | |
| Minimum volume of Luggage (trunk): | 500 l | |
| Maximum amount of Luggage (trunk): | 1010 l | |
| Max weight: | 2155 kg | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| Kerb Weight: | 1655 kg | |
| ABS: | yes | |
| Minimum turning circle (turning diameter): | 10.8 m | |
| Tire size: | 225/55 R17 | |
| Wheel rims size: | R17 |