Comparison Opel Insignia Hatchback (facelift 2013) 2.0 CDTI (195 Hp) AWD Ecotec Automatic & Ford Scorpio I Hatch (GGE) 2.0 i (115 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Opel | Ford |
| Model: | Insignia | Scorpio |
| Generation: | Insignia Hatchback (facelift 2013) | Scorpio I Hatch (GGE) |
| Engine / modification: | 2.0 CDTI (195 Hp) AWD Ecotec Automatic | 2.0 i (115 Hp) |
| Production start: | 2013 year | 1992 year |
| Production end: | 1994 year | |
| Coupe type: | Hatchback | Hatchback |
| Num. of Doors: | 5 | |
| Num. of seats: | 5 | |
| Fuel consumption / economy - urban: | 8.2 l/100 km | |
| Fuel consumption / economy - extra urban: | 4.9 l/100 km | |
| Fuel consumption / economy - combined: | 6.1 l/100 km | |
| Fuel Type: | Diesel | Petrol (Gasoline) |
| Fuel tank volume: | 70 l | |
| Emission standard: | EURO V | |
| CO2 emissions: | 162 g/km | |
| Power: | 195 hp | 115 hp |
| Max power in: | 4000 rpm. | 5500 rpm. |
| Maximum speed: | 225 km/h | |
| Acceleration from 0 to 100 km/h: | 9.0 sec | |
| Torque: | 400 Nm/1750-2500 rpm. | 160 Nm @ 4000 rpm. |
| Engine position: | Front, transverse | Front, longitudinal |
| Engine displacement: | 1956 cm3 | 1993 cm3 |
| Fuel System: | Diesel Commonrail | Multi-point injection |
| Aspiration / Turbine: | Turbo / Intercooler (Turbocharging / Intercooler) | |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | DOHC | |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 4 | 4 |
| Piston Stroke: | 90.4 mm | 77 mm |
| Cylinder Bore: | 83 mm | 90.8 mm |
| Wheel Drive: | All wheel drive (4x4) | |
| Number of Gears (automatic transmission): | 6 | |
| Length: | 4842 mm | |
| Width: | 1856 mm | |
| Width including mirrors: | 2084 mm | |
| Height: | 1498 mm | |
| Wheelbase: | 2737 mm | |
| Front track: | 1587 mm | |
| Rear (Back) track: | 1590 mm | |
| Minimum volume of Luggage (trunk): | 530 l | |
| Maximum amount of Luggage (trunk): | 1470 l | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 11.4 m |