Comparison Opel Insignia Hatchback (facelift 2013) 1.8 (140 Hp) Ecotec & Opel Kadett E 1.6 S (90 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Opel | Opel |
| Model: | Insignia | Kadett |
| Generation: | Insignia Hatchback (facelift 2013) | Kadett E |
| Engine / modification: | 1.8 (140 Hp) Ecotec | 1.6 S (90 Hp) |
| Production start: | 2013 year | 1984 year |
| Production end: | 1986 year | |
| Coupe type: | Hatchback | Sedan |
| Num. of Doors: | 5 | 4 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 9.8 l/100 km | |
| Fuel consumption / economy - extra urban: | 5.4 l/100 km | |
| Fuel consumption / economy - combined: | 7.0 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 70 l | 52 l |
| Emission standard: | EURO V | |
| CO2 emissions: | 164 g/km | |
| Power: | 140 hp | 90 hp |
| Max power in: | 6300 rpm. | 5800 rpm. |
| Maximum speed: | 205 km/h | 180 km/h |
| Acceleration from 0 to 100 km/h: | 11.5 sec | 11 sec |
| Torque: | 175 Nm/3800 rpm. | 126 Nm @ 3800-4200 rpm. |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 1796 cm3 | 1598 cm3 |
| Fuel System: | Multi-point injection | Carburettor |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | SOHC | |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 4 | 2 |
| Compression ratio: | 9.2 | |
| Piston Stroke: | 88.2 mm | 79.5 mm |
| Cylinder Bore: | 80.5 mm | 80 mm |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (manual transmission): | 6 | 5 |
| Length: | 4842 mm | 4218 mm |
| Width: | 1856 mm | 1658 mm |
| Width including mirrors: | 2084 mm | |
| Height: | 1498 mm | 1400 mm |
| Wheelbase: | 2737 mm | 2520 mm |
| Front track: | 1587 mm | 1406 mm |
| Rear (Back) track: | 1590 mm | 1406 mm |
| Minimum volume of Luggage (trunk): | 530 l | 720 l |
| Maximum amount of Luggage (trunk): | 1470 l | |
| Max weight: | 1445 kg | |
| Front brakes: | Disc | |
| Rear brakes: | Drum | |
| Kerb Weight: | 950 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 11.4 m | 10.5 m |