Car technical specifications and fuel economy / consumption / mpg

Comparison Opel Insignia Hatchback (facelift 2013) 1.4 LPG (140 Hp) Turbo Ecotec & Opel Corsavan D (Facelift 2011) 1.2 (70 Hp) Twinport Ecotec


Add car
Opel Insignia Hatchback (facelift 2013) 1.4 LPG (140 Hp) Turbo Ecotec
Remove car
Opel Corsavan D (Facelift 2011) 1.2 (70 Hp) Twinport Ecotec
Remove car
Brand: Opel Opel
Model: Insignia Corsa
Generation: Insignia Hatchback (facelift 2013) Corsavan D (Facelift 2011)
Engine / modification: 1.4 LPG (140 Hp) Turbo Ecotec 1.2 (70 Hp) Twinport Ecotec
Production start: 2013 year 2011 year
Production end: 2014 year
Coupe type: Hatchback Minivan
Num. of Doors: 5 3
Num. of seats: 5 2
Fuel consumption / economy - urban: 7.9/10.1 l/100 km 6.9 l/100 km
Fuel consumption / economy - extra urban: 4.8/6.1 l/100 km 4.4 l/100 km
Fuel consumption / economy - combined: 5.9/7.6 l/100 km 5.3 l/100 km
Fuel Type: Petrol / LPG Petrol (Gasoline)
Fuel tank volume: 41 l 45 l
Emission standard: EURO V EURO V
CO2 emissions: 139/124 g/km 103 g/km
Power: 140 hp 70 hp
Max power in: 4900-6000 rpm. 5600 rpm.
Maximum speed: 195 km/h 160 km/h
Acceleration from 0 to 100 km/h: 11.9 sec 14.9 sec
Torque: 200 Nm/1850-4900 rpm. 115 Nm/4000 rpm.
Model Engine: A14NET
Engine position: Front, transverse Front, transverse
Engine displacement: 1364 cm3 1229 cm3
Fuel System: Multi-point injection Multi-point injection
Aspiration / Turbine: Turbocharging
Position of cylinders: Inline Inline
Number of cylinders: 4 4
Number of valves per cylinder: 4
Compression ratio: 9.5
Piston Stroke: 82.6 mm 72.6 mm
Cylinder Bore: 72.5 mm 73.4 mm
Wheel Drive: Front wheel drive Front wheel drive
Number of Gears (manual transmission): 6 5
Length: 4842 mm 3999 mm
Width: 1856 mm 1944 mm
Width including mirrors: 2084 mm
Height: 1498 mm 1488 mm
Wheelbase: 2737 mm 2511 mm
Front track: 1587 mm 1485 mm
Rear (Back) track: 1590 mm 1478 mm
Minimum volume of Luggage (trunk): 530 l 919 l
Maximum amount of Luggage (trunk): 1470 l
ABS: yes yes
Steering type: Steering rack and pinion Steering rack and pinion
Minimum turning circle (turning diameter): 10.9 m 10.4 m