Comparison Opel Insignia Hatchback 2.0 CDTI (110 Hp) DPF & Chevrolet Bel Air 4.3 V8 (180 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Opel | Chevrolet |
| Model: | Insignia | Bel Air |
| Generation: | Insignia Hatchback | Bel Air |
| Engine / modification: | 2.0 CDTI (110 Hp) DPF | 4.3 V8 (180 Hp) |
| Production start: | 2008 year | 1953 year |
| Production end: | 2013 year | 1957 year |
| Coupe type: | Hatchback | Sedan |
| Num. of Doors: | 5 | |
| Num. of seats: | 5 | |
| Fuel consumption / economy - urban: | 7.6 l/100 km | |
| Fuel consumption / economy - extra urban: | 4.8 l/100 km | |
| Fuel consumption / economy - combined: | 5.8 l/100 km | |
| Fuel Type: | Diesel | Petrol (Gasoline) |
| Fuel tank volume: | 70 l | |
| Emission standard: | EURO V | |
| Power: | 110 hp | 180 hp |
| Max power in: | 4000 rpm. | |
| Maximum speed: | 190 km/h | |
| Acceleration from 0 to 100 km/h: | 12.1 sec | |
| Torque: | 260 Nm/1750 rpm. | |
| Engine position: | Front, transverse | |
| Engine displacement: | 1956 cm3 | |
| Fuel System: | Diesel Commonrail | |
| Aspiration / Turbine: | Turbocharging | |
| Position of cylinders: | Inline | |
| Valvetrain: | OHC | |
| Number of cylinders: | 4 | |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 16.5 | |
| Piston Stroke: | 90.4 mm | |
| Cylinder Bore: | 83 mm | |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (manual transmission): | 6 | |
| Length: | 4830 mm | |
| Width: | 1856 mm | |
| Height: | 1498 mm | |
| Wheelbase: | 2737 mm | |
| Front track: | 1585 mm | |
| Rear (Back) track: | 1587 mm | |
| Ride height(clearance): | 160 mm | |
| Minimum volume of Luggage (trunk): | 520 l | |
| Maximum amount of Luggage (trunk): | 1465 l | |
| Max weight: | 2140 kg | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| Kerb Weight: | 1613 kg | |
| ABS: | yes | |
| Minimum turning circle (turning diameter): | 11.4 m | |
| Tire size: | 215/60 R16; 225/55 R17; 245/45 R18 | |
| Wheel rims size: | R16; R17; R18 |