Comparison Opel Agila II 1.0 (68 Hp) ecoFLEX & Opel Antara (facelift 2010) 2.2 CDTI (184 Hp) AWD Ecotec start/stop
Add car |
Remove car |
Remove car |
| Brand: | Opel | Opel |
| Model: | Agila | Antara |
| Generation: | Agila II | Antara (facelift 2010) |
| Engine / modification: | 1.0 (68 Hp) ecoFLEX | 2.2 CDTI (184 Hp) AWD Ecotec start/stop |
| Production start: | 2008 year | 2010 year |
| Production end: | 2014 year | 2016 year |
| Coupe type: | Hatchback | SUV |
| Num. of Doors: | 5 | 5 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 5.6 l/100 km | 7.9 l/100 km |
| Fuel consumption / economy - extra urban: | 4.2 l/100 km | 5.6 l/100 km |
| Fuel consumption / economy - combined: | 4.7 l/100 km | 6.4 l/100 km |
| Fuel Type: | Petrol (Gasoline) | Diesel |
| Fuel tank volume: | 65 l | |
| Emission standard: | Euro 5 | Euro 5 |
| CO2 emissions: | 109 g/km | 170 g/km |
| Power: | 68 hp | 184 hp |
| Max power in: | 6000 rpm. | 3800 rpm. |
| Maximum speed: | 200 km/h | |
| Acceleration from 0 to 100 km/h: | 9.7 sec | |
| Torque: | 90 Nm @ 4800 rpm. | 400 Nm @ 2000 rpm. |
| Model Engine: | K10B | Z22DMH |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 996 cm3 | 2231 cm3 |
| Engine oil capacity: | 2.9 l | 5.6 l |
| Fuel System: | Multi-point injection | Diesel Commonrail |
| Aspiration / Turbine: | Turbo / Intercooler (Turbocharging / Intercooler) | |
| Position of cylinders: | Inline | Inline |
| Number of cylinders: | 3 | 4 |
| Compression ratio: | 11 | 16.3 |
| Piston Stroke: | 96 mm | |
| Cylinder Bore: | 86 mm | |
| Wheel Drive: | Front wheel drive | All wheel drive (4x4) |
| Number of Gears (manual transmission): | 5 | 6 |
| Length: | 3740 mm | 4596 mm |
| Width: | 1680 mm | 1850 mm |
| Height: | 1590 mm | 1761 mm |
| Wheelbase: | 2360 mm | 2707 mm |
| Front track: | 1470 mm | 1569 mm |
| Rear (Back) track: | 1480 mm | 1576 mm |
| Minimum volume of Luggage (trunk): | 402 l | |
| Maximum amount of Luggage (trunk): | 1391 l | |
| ABS: | yes | yes |
| Steering type: | Steering rack and pinion | Steering rack and pinion |
| Minimum turning circle (turning diameter): | 10 m | 12.25 m |