Car technical specifications and fuel economy / consumption / mpg

Comparison Nissan Cedric (Y31) 3.0i V6 (195 Hp) Automatic & SMA C52 1.5 (95Hp)


Add car
Nissan Cedric (Y31) 3.0i V6 (195 Hp) Automatic
Remove car
SMA C52 1.5 (95Hp)
Remove car
Brand: Nissan SMA
Model: Cedric C52
Generation: Cedric (Y31) C52
Engine / modification: 3.0i V6 (195 Hp) Automatic 1.5 (95Hp)
Production start: 1987 year 2005 year
Production end: 1989 year
Coupe type: Sedan Sedan
Num. of Doors: 4 4
Num. of seats: 5 5
Fuel consumption / economy - urban: 14.2-18.6 l/100 km
Fuel consumption / economy - extra urban: 8.6-11.3 l/100 km 6.5 l/100 km
Fuel consumption / economy - combined: 12.3 l/100 km
Fuel Type: Petrol (Gasoline) Petrol (Gasoline)
Drag coefficient: 0.4
Fuel tank volume: 72 l 51 l
Emission standard: EURO III
Power: 195 hp 95 hp
Max power in: 5200 rpm. 6000 rpm.
Maximum speed: 204 km/h 160 km/h
Acceleration from 0 to 100 km/h: 9 sec
Torque: 294 Nm/3200 rpm. 128 Nm/3400 rpm.
Model Engine: JL479QA
Engine position: Front, longitudinal Front, transverse
Engine displacement: 2960 cm3 1498 cm3
Fuel System: Multi-point injection Multi-point injection
Aspiration / Turbine: Turbocharging
Position of cylinders: V engine Inline
Valvetrain: SOHC DOHC
Number of cylinders: 6 4
Number of valves per cylinder: 2 4
Compression ratio: 8.3 9.8
Piston Stroke: 83 mm
Cylinder Bore: 87 mm
Wheel Drive: Rear wheel drive Front wheel drive
Number of Gears (automatic transmission): 4
Number of Gears (manual transmission): 5
Length: 4690 mm 4435 mm
Width: 1720 mm 1710 mm
Height: 1400 mm 1430 mm
Wheelbase: 2735 mm 2540 mm
Front track: 1445 mm 1423 mm
Rear (Back) track: 1460 mm 1424 mm
Ride height(clearance): 135 mm
Maximum amount of Luggage (trunk): 520 l
Front suspension: Independent, Spring McPherson, with stabilizer
Rear suspension: Semi-dependent on the trailing arm with transverse torsion shaft
Max weight: 1540 kg
Front brakes: Ventilated discs Ventilated discs
Rear brakes: Ventilated discs Drum
Kerb Weight: 1520 kg 1160 kg
ABS: yes
Steering type: Steering rack and pinion Steering rack and pinion
Power steering: Hydraulic Steering
Minimum turning circle (turning diameter): 11 m 10.5 m
Tire size: 205/65 R15 175/65 R14
Wheel rims size: R15