Comparison Nissan AD Y10 2.0d (76 Hp) Automatic & Volkswagen Cross Up! 1.0 (75 Hp) ASG
Add car |
Remove car |
Remove car |
| Brand: | Nissan | Volkswagen |
| Model: | AD | Up! |
| Generation: | AD Y10 | Cross Up! |
| Engine / modification: | 2.0d (76 Hp) Automatic | 1.0 (75 Hp) ASG |
| Production start: | 1990 year | 2013 year |
| Production end: | 1996 year | 2016 year |
| Coupe type: | Combi | Hatchback |
| Num. of Doors: | 5 | 4 |
| Num. of seats: | 5 | 4 |
| Fuel consumption / economy - urban: | 5.4 l/100 km | |
| Fuel consumption / economy - extra urban: | 4.1 l/100 km | |
| Fuel consumption / economy - combined: | 4.6 l/100 km | |
| Fuel Type: | Diesel | Petrol (Gasoline) |
| Fuel tank volume: | 50 l | 35 l |
| Emission standard: | Euro 5 | |
| CO2 emissions: | 106 g/km | |
| Power: | 76 hp | 75 hp |
| Max power in: | 4800 rpm. | 6200 rpm. |
| Maximum speed: | 167 km/h | |
| Acceleration from 0 to 100 km/h: | 14.9 sec | |
| Torque: | 132 Nm @ 2800 rpm. | 95 Nm @ 3000-4300 rpm. |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 1974 cm3 | 999 cm3 |
| Fuel System: | Diesel - Standard diesel injection (SDI) | Multi-point injection |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | OHC | |
| Number of cylinders: | 4 | 3 |
| Number of valves per cylinder: | 2 | 4 |
| Compression ratio: | 22.2 | |
| Piston Stroke: | 88 mm | |
| Cylinder Bore: | 84.5 mm | |
| Wheel Drive: | Front wheel drive | Front wheel drive |
| Number of Gears (automatic transmission): | 4 | 5 |
| Length: | 4175 mm | 3563 mm |
| Width: | 1665 mm | 1649 mm |
| Height: | 1480 mm | 1516 mm |
| Wheelbase: | 2400 mm | 2420 mm |
| Front track: | 1445 mm | 1417 mm |
| Rear (Back) track: | 1445 mm | 1416 mm |
| Ride height(clearance): | 140 mm | |
| Minimum volume of Luggage (trunk): | 251 l | |
| Maximum amount of Luggage (trunk): | 959 l | |
| Max weight: | 1310 kg | |
| Front brakes: | Ventilated discs | Ventilated discs |
| Rear brakes: | Drum | |
| Kerb Weight: | 992 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 9.8 m |