Car technical specifications and fuel economy / consumption / mpg

Comparison Mitsubishi Lancer III Wagon 1.8 D (60 Hp) & Volvo S40 II 2.4 i 20V (170 Hp)


Add car
Mitsubishi Lancer III Wagon 1.8 D (60 Hp)
Remove car
Volvo S40 II 2.4 i 20V (170 Hp)
Remove car
Brand: Mitsubishi Volvo
Model: Lancer S40
Generation: Lancer III Wagon S40 II
Engine / modification: 1.8 D (60 Hp) 2.4 i 20V (170 Hp)
Production start: 1986 year 2004 year
Production end: 1992 year 2007 year
Coupe type: Combi Sedan
Num. of Doors: 5 4
Num. of seats: 5 5
Fuel consumption / economy - urban: 7.1 l/100 km 12.4 l/100 km
Fuel consumption / economy - extra urban: 4.7 l/100 km 6.6 l/100 km
Fuel consumption / economy - combined: 6.8 l/100 km 8.5 l/100 km
Fuel Type: Diesel Petrol (Gasoline)
Fuel tank volume: 47 l 62 l
Emission standard: EURO IV
Power: 60 hp 170 hp
Max power in: 4500 rpm. 6000 rpm.
Maximum speed: 145 km/h 220 km/h
Acceleration from 0 to 100 km/h: 15.4 sec 8.2 sec
Torque: 113 Nm @ 3000 rpm. 230 Nm/4400 rpm.
Model Engine: B5244S4
Engine position: Front, transverse Front, transverse
Engine displacement: 1796 cm3 2435 cm3
Fuel System: Diesel - Standard diesel injection (SDI) Multi-point injection
Position of cylinders: Inline Inline
Valvetrain: OHC DOHC
Number of cylinders: 4 5
Number of valves per cylinder: 2 4
Compression ratio: 21.5 10.3
Piston Stroke: 88 mm 90 mm
Cylinder Bore: 80.6 mm 83 mm
Wheel Drive: Front wheel drive Front wheel drive
Number of Gears (automatic transmission): -
Number of Gears (manual transmission): 5 5
Length: 4115 mm 4476 mm
Width: 1635 mm 1770 mm
Height: 1415 mm 1454 mm
Wheelbase: 2380 mm 2640 mm
Front track: 1410 mm 1535 mm
Rear (Back) track: 1340 mm 1531 mm
Minimum volume of Luggage (trunk): 377 l 404 l
Maximum amount of Luggage (trunk): 883 l
Front suspension: Coil spring Transverse stabilizer
Rear suspension: Helical spring Transverse stabilizer
Max weight: 1940 kg
Front brakes: Disc Ventilated discs
Rear brakes: Drum Disc
Kerb Weight: 1000 kg 1400 kg
ABS: yes
Steering type: Steering rack and pinion Steering rack and pinion
Power steering: Hydraulic Steering Hydraulic Steering
Minimum turning circle (turning diameter): 11.1 m
Tire size: 175/70 R13 205/55 R16 V