Comparison Mitsubishi Dingo (CJ) 1.3 i 16V (80 Hp) & Toyota Belta 1.5 (106 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Mitsubishi | Toyota |
| Model: | Dingo | Belta |
| Generation: | Dingo (CJ) | Belta |
| Engine / modification: | 1.3 i 16V (80 Hp) | 1.5 (106 Hp) |
| Production start: | 1999 year | 2005 year |
| Production end: | 2002 year | 2012 year |
| Coupe type: | Hatchback | Sedan |
| Num. of Doors: | 5 | 4 |
| Num. of seats: | 5 | 5 |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 50 l | 42 l |
| Power: | 80 hp | 106 hp |
| Max power in: | 5000 rpm. | 6000 rpm. |
| Torque: | 118 Nm @ 3000 rpm. | 145 Nm @ 4200 rpm. |
| Model Engine: | 1NZ-FE | |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 1298 cm3 | 1497 cm3 |
| Engine oil capacity: | 3.4 l | |
| Fuel System: | Multi-point injection | Multi-point injection |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | OHC | DOHC |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 4 | 4 |
| Compression ratio: | 10.5 | |
| Piston Stroke: | 84.7 mm | |
| Cylinder Bore: | 75 mm | |
| Wheel Drive: | Front wheel drive | Front wheel drive |
| Number of Gears (automatic transmission): | 4 | 4 |
| Number of Gears (manual transmission): | 5 | |
| Length: | 3905 mm | 4300 mm |
| Width: | 1695 mm | 1895 mm |
| Height: | 1635 mm | 1460 mm |
| Wheelbase: | 2440 mm | 2550 mm |
| Front track: | 1470 mm | |
| Rear (Back) track: | 1470 mm | |
| Front suspension: | Coil spring | |
| Rear suspension: | Helical spring | |
| Max weight: | 1415 kg | |
| Front brakes: | Disc | |
| Rear brakes: | Drum | |
| Kerb Weight: | 1140 kg | |
| Steering type: | Steering rack and pinion | |
| Power steering: | Hydraulic Steering | |
| Minimum turning circle (turning diameter): | 9.4 m | |
| Tire size: | 175/70 R14 |