Comparison MG MGF 1.8 i 16V (145 Hp) & Toyota 4runner I 3.0i V6 (145 Hp) 4x4
Add car |
Remove car |
Remove car |
| Brand: | MG | Toyota |
| Model: | MGF | 4runner |
| Generation: | MGF | 4runner I |
| Engine / modification: | 1.8 i 16V (145 Hp) | 3.0i V6 (145 Hp) 4x4 |
| Production start: | 1995 year | 1988 year |
| Production end: | 2000 year | 1989 year |
| Coupe type: | Cabriolet | SUV |
| Num. of Doors: | 2 | 3 |
| Num. of seats: | 2 | 5 |
| Fuel consumption / economy - urban: | 16.1 l/100 km | |
| Fuel consumption / economy - extra urban: | 10.7 l/100 km | |
| Fuel consumption / economy - combined: | 15.5 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 50 l | 65 l |
| Power: | 145 hp | 145 hp |
| Max power in: | 7000 rpm. | 4600 rpm. |
| Maximum speed: | 209 km/h | 165 km/h |
| Acceleration from 0 to 100 km/h: | 7 sec | 15.3 sec |
| Torque: | 174 Nm @ 4500 rpm. | 240 Nm @ 3400 rpm. |
| Model Engine: | 3VZ-E | |
| Engine position: | Middle, longitudinal | Front, longitudinal |
| Engine displacement: | 1795 cm3 | 2958 cm3 |
| Engine oil capacity: | 4.5 l | |
| Coolant: | 8.5 l | |
| Fuel System: | Multi-point injection | Multi-point injection |
| Position of cylinders: | Inline | V engine |
| Valvetrain: | SOHC | |
| Number of cylinders: | 4 | 6 |
| Number of valves per cylinder: | 4 | 2 |
| Compression ratio: | 10 | 9 |
| Piston Stroke: | 82 mm | |
| Cylinder Bore: | 87.5 mm | |
| Wheel Drive: | Rear wheel drive | Part time 4x4 |
| Number of Gears (automatic transmission): | - | 4 |
| Number of Gears (manual transmission): | 5 | 5 |
| Length: | 3920 mm | 4435 mm |
| Width: | 1630 mm | 1689 mm |
| Height: | 1260 mm | 1679 mm |
| Wheelbase: | 2375 mm | 2625 mm |
| Front track: | 1400 mm | 1430 mm |
| Rear (Back) track: | 1410 mm | 1425 mm |
| Ride height(clearance): | 269 mm | |
| Approach angle: | 37 ° | |
| Departure angle: | 22.5 ° | |
| Minimum volume of Luggage (trunk): | 1200 l | |
| Maximum amount of Luggage (trunk): | 210 l | 2100 l |
| Front suspension: | Hydro-pneumatic element | Independent torsion bar, double wishbone |
| Rear suspension: | Hydro-pneumatic element | The spring |
| Max weight: | 1320 kg | 2430 kg |
| Front brakes: | Disc | Ventilated discs |
| Rear brakes: | Disc | Drum |
| Kerb Weight: | 1070 kg | 1800 kg |
| ABS: | yes | |
| Steering type: | Worm-reduction unit | |
| Power steering: | Hydraulic Steering | Hydraulic Steering |
| Minimum turning circle (turning diameter): | 11.3 m | |
| Tire size: | 185/55 R15; 205/50 R15 | 225/75 R15 |
| Wheel rims size: | R15 |