Comparison Mercedes-Benz W188 II Roadster 300 Sc (175 Hp) & Volvo XC60 I 3.2 (238 Hp) AWD
Add car |
Remove car |
Remove car |
| Brand: | Mercedes-Benz | Volvo |
| Model: | W188 | XC60 |
| Generation: | W188 II Roadster | XC60 I |
| Engine / modification: | 300 Sc (175 Hp) | 3.2 (238 Hp) AWD |
| Production start: | 1956 year | 2009 year |
| Production end: | 1958 year | 2010 year |
| Coupe type: | Roadster | SUV |
| Num. of Doors: | 2 | 5 |
| Num. of seats: | 4 | 5 |
| Fuel consumption / economy - urban: | 16.2 l/100 km | |
| Fuel consumption / economy - extra urban: | 8.3 l/100 km | |
| Fuel consumption / economy - combined: | 12.5 l/100 km | 11.2 l/100 km |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 85 l | 70 l |
| Power: | 175 hp | 238 hp |
| Max power in: | 5400 rpm. | 6200 rpm. |
| Maximum speed: | 180 km/h | |
| Acceleration from 0 to 100 km/h: | 14 sec | 9.4 sec |
| Torque: | 255 Nm @ 4300 rpm. | 320 Nm @ 3200 rpm. |
| Model Engine: | M 199 / 199.980 | B6324S |
| Engine position: | Front, longitudinal | Front, transverse |
| Engine displacement: | 2996 cm3 | 3192 cm3 |
| Engine oil capacity: | 7.4 l | |
| Fuel System: | Direct injection | Multi-point injection |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | SOHC | |
| Number of cylinders: | 6 | 6 |
| Number of valves per cylinder: | 2 | |
| Compression ratio: | 8.55 | |
| Piston Stroke: | 88 mm | 82 mm |
| Cylinder Bore: | 85 mm | |
| Wheel Drive: | Rear wheel drive | Front wheel drive |
| Number of Gears (manual transmission): | 4 | |
| Length: | 4700 mm | 4627 mm |
| Width: | 1916 mm | 1888 mm |
| Height: | 1510 mm | 1713 mm |
| Wheelbase: | 2900 mm | 2774 mm |
| Front track: | 1480 mm | 1632 mm |
| Rear (Back) track: | 1525 mm | 1586 mm |
| Minimum volume of Luggage (trunk): | 873 l | |
| Max weight: | 2040 kg | 2440 kg |
| Front brakes: | Drum | |
| Rear brakes: | Drum | |
| Kerb Weight: | 1780 kg | 1874 kg |
| ABS: | yes | |
| Steering type: | Cone worm with recirculation balls | Steering rack and pinion |
| Minimum turning circle (turning diameter): | 11.9 m |