Comparison Mercedes-Benz W120 Sedan (facelift 1959) 180 b (68 Hp) & Volvo V50 II 2.5 T5 (230 Hp) Automatic
Add car |
Remove car |
Remove car |
| Brand: | Mercedes-Benz | Volvo |
| Model: | Ponton | V50 |
| Generation: | W120 Sedan (facelift 1959) | V50 II |
| Engine / modification: | 180 b (68 Hp) | 2.5 T5 (230 Hp) Automatic |
| Production start: | 1959 year | 2007 year |
| Production end: | 1961 year | 2012 year |
| Coupe type: | Sedan | Combi |
| Num. of Doors: | 5 | 5 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 13.5 l/100 km | |
| Fuel consumption / economy - extra urban: | 6.5 l/100 km | |
| Fuel consumption / economy - combined: | 10.9 l/100 km | 9.0 l/100 km |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 56 l | 62 l |
| Power: | 68 hp | 230 hp |
| Max power in: | 4400 rpm. | 6000 rpm. |
| Maximum speed: | 135 km/h | |
| Acceleration from 0 to 100 km/h: | 21 sec | 7.3 sec |
| Torque: | 129 Nm @ 2500 rpm. | 320 Nm/1500-5000 rpm. |
| Model Engine: | M 121 B IV b / 121.923 | |
| Engine position: | Front, longitudinal | Front, transverse |
| Engine displacement: | 1897 cm3 | 2521 cm3 |
| Fuel System: | Carburettor | Multi-point injection |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | SOHC | |
| Number of cylinders: | 4 | 5 |
| Number of valves per cylinder: | 2 | |
| Compression ratio: | 7 | |
| Piston Stroke: | 83.6 mm | 83 mm |
| Cylinder Bore: | 85 mm | |
| Wheel Drive: | Rear wheel drive | Front wheel drive |
| Number of Gears (automatic transmission): | 5 | |
| Number of Gears (manual transmission): | 4 | |
| Length: | 4500 mm | 4522 mm |
| Width: | 1740 mm | 1845 mm |
| Height: | 1560 mm | 1457 mm |
| Wheelbase: | 2650 mm | 2640 mm |
| Front track: | 1430 mm | 1535 mm |
| Rear (Back) track: | 1475 mm | 1531 mm |
| Minimum volume of Luggage (trunk): | 417 l | |
| Max weight: | 1615 kg | 2000 kg |
| Front brakes: | Drum | |
| Rear brakes: | Drum | |
| Kerb Weight: | 1065 kg | 1504 kg |
| ABS: | yes | |
| Steering type: | Cone worm with recirculation balls | Steering rack and pinion |
| Minimum turning circle (turning diameter): | 11.1 m |