Comparison Mercedes-Benz Cabrio (A124) 300 CE-24 (124.061) (220 Hp) & Fiat Panda 4x4 1.3 i 16V Multijet 4X4 (70 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Mercedes-Benz | Fiat |
| Model: | Cabrio | Panda |
| Generation: | Cabrio (A124) | Panda 4x4 |
| Engine / modification: | 300 CE-24 (124.061) (220 Hp) | 1.3 i 16V Multijet 4X4 (70 Hp) |
| Production start: | 1989 year | 2004 year |
| Production end: | 1992 year | |
| Coupe type: | Coupe | Hatchback |
| Num. of Doors: | 2 | 5 |
| Num. of seats: | 4 | 5 |
| Fuel Type: | Petrol (Gasoline) | Diesel |
| Fuel tank volume: | 35 l | |
| Power: | 220 hp | 70 hp |
| Max power in: | 4000 rpm. | |
| Maximum speed: | 235 km/h | 155 km/h |
| Acceleration from 0 to 100 km/h: | 16 sec | |
| Torque: | 180 Nm/1750 rpm. | |
| Engine position: | Front, transverse | |
| Engine displacement: | 3000 cm3 | 1251 cm3 |
| Fuel System: | Diesel Commonrail | |
| Aspiration / Turbine: | Turbo / Intercooler (Turbocharging / Intercooler) | |
| Position of cylinders: | Inline | |
| Valvetrain: | DOHC | |
| Number of cylinders: | 6 | 4 |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 18 | |
| Piston Stroke: | 82 mm | |
| Cylinder Bore: | 69.6 mm | |
| Wheel Drive: | All wheel drive (4x4) | |
| Number of Gears (automatic transmission): | - | |
| Number of Gears (manual transmission): | 5 | |
| Length: | 3538 mm | |
| Width: | 1578 mm | |
| Height: | 1540 mm | |
| Wheelbase: | 2299 mm | |
| Front track: | 1366 mm | |
| Rear (Back) track: | 1357 mm | |
| Minimum volume of Luggage (trunk): | 206 l | |
| Maximum amount of Luggage (trunk): | 775 l | |
| Front suspension: | The depreciated rack | |
| Rear suspension: | Torsion | |
| Front brakes: | Disc | |
| Rear brakes: | Disc | |
| ABS: | yes | yes |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 9.1 m | |
| Tire size: | 155/80 R13 | |
| Wheel rims size: | 5J x 13 |