Car technical specifications and fuel economy / consumption / mpg

Comparison Mercedes-Benz B-class (W247, facelift 2022) B 200d (150 Hp) 8G-DCT & Opel Insignia Sedan (facelift 2013) 2.0 CDTI (163 Hp) AWD Ecotec Automatic


Add car
Mercedes-Benz B-class (W247, facelift 2022) B 200d (150 Hp) 8G-DCT
Remove car
Opel Insignia Sedan (facelift 2013) 2.0 CDTI (163 Hp) AWD Ecotec Automatic
Remove car
Brand: Mercedes-Benz Opel
Model: B-class Insignia
Generation: B-class (W247, facelift 2022) Insignia Sedan (facelift 2013)
Engine / modification: B 200d (150 Hp) 8G-DCT 2.0 CDTI (163 Hp) AWD Ecotec Automatic
Production start: 2022 year 2013 year
Coupe type: Hatchback Sedan
Powertrain Architecture: Internal Combustion engine
Num. of Doors: 5 4
Num. of seats: 5 5
Fuel consumption / economy - urban: 5.5 l/100 km
Fuel consumption / economy - extra urban: 4.9 l/100 km
Fuel consumption / economy - combined: 6.2 l/100 km
Fuel Type: Diesel Diesel
Fuel tank volume: 70 l
Combined fuel consumption (WLTP): 5.1-5.6 l/100 km
Emission standard: EURO V
CO2 emissions: 164 g/km
Power: 150 hp 163 hp
Max power in: 3400 rpm. 4000 rpm.
Maximum speed: 219 km/h 210 km/h
Acceleration from 0 to 100 km/h: 8.5 sec 10.5 sec
CO2 emissions (WLTP): 133-148 g/km
Torque: 320 Nm 350 Nm/1750-2500 rpm.
Model Engine: OM 654.920
Engine position: Front, transverse Front, transverse
Engine displacement: 1950 cm3 1956 cm3
Engine oil capacity: 6.8 l
Coolant: 10 l
Fuel System: Diesel Commonrail Diesel Commonrail
Aspiration / Turbine: Turbo / Intercooler (Turbocharging / Intercooler)
Position of cylinders: Inline Inline
Number of cylinders: 4 4
Number of valves per cylinder: 4 4
Piston Stroke: 90.4 mm
Cylinder Bore: 83 mm
Wheel Drive: Front wheel drive All wheel drive (4x4)
Number of Gears (automatic transmission): 6
Length: 4842 mm
Width: 1856 mm
Width including mirrors: 2084 mm
Height: 1498 mm
Wheelbase: 2737 mm
Front track: 1587 mm
Rear (Back) track: 1590 mm
Minimum volume of Luggage (trunk): 500 l
Maximum amount of Luggage (trunk): 1015 l
ABS: yes
Steering type: Steering rack and pinion
Minimum turning circle (turning diameter): 10.9 m