Comparison Mazda Familia Wagon 1.8 i (135 Hp) & Mazda Mx-5 III (facelift 2012) 1.8 MZR (126 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Mazda | Mazda |
| Model: | Familia | MX-5 |
| Generation: | Familia Wagon | Mx-5 III (facelift 2012) |
| Engine / modification: | 1.8 i (135 Hp) | 1.8 MZR (126 Hp) |
| Production start: | 2002 year | 2012 year |
| Production end: | 2004 year | |
| Coupe type: | Combi | Cabriolet |
| Num. of Doors: | 5 | 2 |
| Num. of seats: | 5 | 2 |
| Fuel consumption / economy - urban: | 9.8 l/100 km | |
| Fuel consumption / economy - extra urban: | 5.6 l/100 km | |
| Fuel consumption / economy - combined: | 7.1 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 50 l | 50 l |
| Emission standard: | EURO V | |
| CO2 emissions: | 167 g/km | |
| Power: | 135 hp | 126 hp |
| Max power in: | 7000 rpm. | 6500 rpm. |
| Maximum speed: | 194 km/h | |
| Acceleration from 0 to 100 km/h: | 9.9 sec | |
| Torque: | 157 Nm @ 4500 rpm. | 167 Nm/4500 rpm. |
| Model Engine: | BP-ZE | |
| Engine position: | Front, transverse | Front, longitudinal |
| Engine displacement: | 1845 cm3 | 1798 cm3 |
| Fuel System: | Multi-point injection | Multi-point injection |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | DOHC | DOHC |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 4 | 4 |
| Compression ratio: | 9 | 10.8 |
| Piston Stroke: | 85 mm | 83.1 mm |
| Cylinder Bore: | 83 mm | 83 mm |
| Wheel Drive: | Front wheel drive | Rear wheel drive |
| Number of Gears (manual transmission): | 5 | |
| Length: | 4200 mm | 4020 mm |
| Width: | 1695 mm | 1720 mm |
| Height: | 1420 mm | 1245 mm |
| Wheelbase: | 2610 mm | 2330 mm |
| Front track: | 1470 mm | 1490 mm |
| Rear (Back) track: | 1470 mm | 1495 mm |
| Ride height(clearance): | 136 mm | |
| Minimum volume of Luggage (trunk): | 150 l | |
| Max weight: | 1170 kg | 1375 kg |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Drum | |
| Kerb Weight: | 1150 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 10 m |