Comparison Mazda Capella 2.0i (145 Hp) & Holden Cruze Hatch (JH) 1.8 ECOTEC (141 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Mazda | Holden |
| Model: | Capella | Cruze |
| Generation: | Capella | Cruze Hatch (JH) |
| Engine / modification: | 2.0i (145 Hp) | 1.8 ECOTEC (141 Hp) |
| Production start: | 1989 year | 2011 year |
| Production end: | 1994 year | 2014 year |
| Coupe type: | Sedan | Hatchback |
| Powertrain Architecture: | Internal Combustion engine | |
| Num. of Doors: | 4 | 5 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - combined: | 7 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 60 l | 60 l |
| CO2 emissions: | 165 g/km | |
| Power: | 145 hp | 141 hp |
| Max power in: | 6500 rpm. | 6200 rpm. |
| Torque: | 184 Nm @ 5000 rpm. | 176 Nm @ 3800 rpm. |
| Model Engine: | A18XER | |
| Engine position: | Front, transverse | |
| Engine displacement: | 1999 cm3 | 1796 cm3 |
| Engine oil capacity: | 4.5 l | |
| Coolant: | 6.5 l | |
| Fuel System: | Multi-point injection | |
| Aspiration / Turbine: | Naturally aspirated engine | |
| Position of cylinders: | Inline | |
| Valvetrain: | DOHC | DOHC, DCVCP |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 4 | 4 |
| Compression ratio: | 10 | 10.5 |
| Piston Stroke: | 83.1 mm | 88.2 mm |
| Cylinder Bore: | 87.5 mm | 80.5 mm |
| Wheel Drive: | Front wheel drive | Front wheel drive |
| Number of Gears (automatic transmission): | 4 | |
| Number of Gears (manual transmission): | 5 | |
| Length: | 4515 mm | 4518 mm |
| Width: | 1690 mm | 1797 mm |
| Height: | 1395 mm | 1477 mm |
| Wheelbase: | 2575 mm | 2685 mm |
| Front track: | 1460 mm | 1539-1545 mm |
| Rear (Back) track: | 1455 mm | 1561-1567 mm |
| Minimum volume of Luggage (trunk): | 413 l | |
| Maximum amount of Luggage (trunk): | 1245 l | |
| Max weight: | 1799 kg | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Drum | |
| Kerb Weight: | 1391 kg | |
| Steering type: | Steering rack and pinion | |
| Power steering: | Hydraulic Steering | |
| Minimum turning circle (turning diameter): | 10.9 m | |
| Permitted trailer load with brakes (12%): | 1200 kg | |
| Permitted trailer load without brakes: | 695 kg | |
| Tire size: | 165/80 R13 | 205/60 R16; 215/50 R17 |
| Wheel rims size: | 4.5J x 13 | 6.5J x 16; 7J x 17 |