Comparison Mazda 626 III (GD) 2.0 12V (107 Hp) & Opel Insignia Sedan OPC 2.8 V6 Turbo (325 Hp) 4x4
Add car |
Remove car |
Remove car |
| Brand: | Mazda | Opel |
| Model: | 626 | Insignia |
| Generation: | 626 III (GD) | Insignia Sedan |
| Engine / modification: | 2.0 12V (107 Hp) | OPC 2.8 V6 Turbo (325 Hp) 4x4 |
| Production start: | 1987 year | 2009 year |
| Production end: | 1992 year | 2013 year |
| Coupe type: | Sedan | Sedan |
| Num. of Doors: | 4 | |
| Num. of seats: | 5 | |
| Fuel consumption / economy - urban: | 16.6 l/100 km | |
| Fuel consumption / economy - extra urban: | 8.4 l/100 km | |
| Fuel consumption / economy - combined: | 11.4 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Drag coefficient: | 0.27 | |
| Fuel tank volume: | 70 l | |
| Emission standard: | EURO V | |
| CO2 emissions: | 249 g/km | |
| Power: | 107 hp | 325 hp |
| Max power in: | 5250 rpm. | |
| Maximum speed: | 250 km/h | |
| Acceleration from 0 to 100 km/h: | 6.0 sec | |
| Torque: | 435 Nm/5250 rpm. | |
| Engine position: | Front, transverse | |
| Engine displacement: | 2792 cm3 | |
| Fuel System: | Multi-point injection | |
| Aspiration / Turbine: | Turbocharging | |
| Position of cylinders: | V engine | |
| Number of cylinders: | 6 | |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 9.5 | |
| Piston Stroke: | 74.8 mm | |
| Cylinder Bore: | 89 mm | |
| Wheel Drive: | All wheel drive (4x4) | |
| Number of Gears (manual transmission): | 6 | |
| Length: | 4830 mm | |
| Width: | 1858 mm | |
| Height: | 1498 mm | |
| Wheelbase: | 2737 mm | |
| Front track: | 1585 mm | |
| Rear (Back) track: | 1587 mm | |
| Minimum volume of Luggage (trunk): | 500 l | |
| Maximum amount of Luggage (trunk): | 1010 l | |
| Max weight: | 2315 kg | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Ventilated discs | |
| Kerb Weight: | 1810 kg | |
| ABS: | yes | |
| Minimum turning circle (turning diameter): | 10.8 m | |
| Tire size: | 245/40 R19 | |
| Wheel rims size: | 8,5 x 19 |