Comparison Mazda 6 III Sport Combi (GJ) 2.0 SKYACTIV-G (165 Hp) i-ELOOP & Volvo S80 II (facelift 2011) 2.4 D5 (215 Hp) MT
Add car |
Remove car |
Remove car |
| Brand: | Mazda | Volvo |
| Model: | 6 | S80 |
| Generation: | 6 III Sport Combi (GJ) | S80 II (facelift 2011) |
| Engine / modification: | 2.0 SKYACTIV-G (165 Hp) i-ELOOP | 2.4 D5 (215 Hp) MT |
| Production start: | 2012 year | 2011 year |
| Production end: | 2015 year | 2013 year |
| Coupe type: | Combi | Sedan |
| Num. of Doors: | 5 | 4 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 7.5 l/100 km | 6.1 l/100 km |
| Fuel consumption / economy - extra urban: | 4.9 l/100 km | 4.2 l/100 km |
| Fuel consumption / economy - combined: | 5.9 l/100 km | 4.9 l/100 km |
| Fuel Type: | Petrol (Gasoline) | Diesel |
| Fuel tank volume: | 62 l | 70 l |
| Emission standard: | Euro 5 | EURO V |
| Power: | 165 hp | 215 hp |
| Max power in: | 6000 rpm. | 4000 rpm. |
| Maximum speed: | 214 km/h | |
| Acceleration from 0 to 100 km/h: | 9.1 sec | 7.6 sec |
| Torque: | 210 Nm @ 4000 rpm. | 420 Nm/1500-3250 rpm. |
| Model Engine: | D5244T11 | |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 1998 cm3 | 2400 cm3 |
| Fuel System: | Direct injection | Diesel Commonrail |
| Aspiration / Turbine: | Turbo / Intercooler (Turbocharging / Intercooler) | |
| Position of cylinders: | Inline | Inline |
| Number of cylinders: | 4 | 5 |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 14 | |
| Piston Stroke: | 81 mm | |
| Wheel Drive: | Front wheel drive | Front wheel drive |
| Number of Gears (manual transmission): | 6 | 6 |
| Length: | 4800 mm | 4851 mm |
| Width: | 1840 mm | 1861 mm |
| Height: | 1480 mm | 1493 mm |
| Wheelbase: | 2750 mm | 2835 mm |
| Front track: | 1588 mm | |
| Rear (Back) track: | 1585 mm | |
| Minimum volume of Luggage (trunk): | 502 l | 480 l |
| Max weight: | 2190 kg | |
| Kerb Weight: | 1320 kg | 1641 kg |
| ABS: | yes | yes |
| Steering type: | Steering rack and pinion | Steering rack and pinion |
| Minimum turning circle (turning diameter): | 11.7 m |