Comparison Mazda 3 III Sedan (BM) 2.0i (120 Hp) & Mazda Cosmo (L10A) 1.0 Wankel (110 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Mazda | Mazda |
| Model: | 3 | Cosmo |
| Generation: | 3 III Sedan (BM) | Cosmo (L10A) |
| Engine / modification: | 2.0i (120 Hp) | 1.0 Wankel (110 Hp) |
| Production start: | 2014 year | 1967 year |
| Production end: | 1968 year | |
| Coupe type: | Sedan | Coupe |
| Num. of Doors: | 4 | 2 |
| Num. of seats: | 5 | 4 |
| Fuel consumption / economy - urban: | 6.5 l/100 km | |
| Fuel consumption / economy - extra urban: | 4.3 l/100 km | |
| Fuel consumption / economy - combined: | 5.1 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 51 l | 57 l |
| Emission standard: | EURO V | |
| CO2 emissions: | 119 g/km | |
| Power: | 120 hp | 110 hp |
| Max power in: | 4500 rpm. | 7000 rpm. |
| Maximum speed: | 198 km/h | 185 km/h |
| Acceleration from 0 to 100 km/h: | 8.8 sec | |
| Torque: | 210 Nm/4000 rpm. | 127 Nm @ 3500 rpm. |
| Model Engine: | 0810 | |
| Engine position: | Front, transverse | Front, longitudinal |
| Engine displacement: | 1998 cm3 | 982 cm3 |
| Fuel System: | Direct injection | Carburettor |
| Position of cylinders: | Inline | Rotary (Wankel) |
| Number of cylinders: | 4 | 2 |
| Number of valves per cylinder: | 4 | 3 |
| Compression ratio: | 14 | |
| Wheel Drive: | Front wheel drive | Rear wheel drive |
| Number of Gears (manual transmission): | 6 | 4 |
| Length: | 4580 mm | 4140 mm |
| Width: | 1595 mm | |
| Width with mirrors folded: | 1795 mm | |
| Width including mirrors: | 2053 mm | |
| Height: | 1450 mm | 1165 mm |
| Wheelbase: | 2700 mm | 2200 mm |
| Front track: | 1250 mm | |
| Rear (Back) track: | 1240 mm | |
| Ride height(clearance): | 155 mm | 125 mm |
| Minimum volume of Luggage (trunk): | 419 l | |
| Front suspension: | Wishbone | |
| Max weight: | 1815 kg | |
| Front brakes: | Ventilated discs | Disc |
| Rear brakes: | Disc | Drum |
| Kerb Weight: | 1200 kg | 940 kg |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 9.8 m |