Comparison Mahindra MM 775 2.1 D XDB (62 Hp) & Chevrolet Malibu IV Sedan 3.8 V6 (110 Hp) CAT Automatic
Add car |
Remove car |
Remove car |
| Brand: | Mahindra | Chevrolet |
| Model: | MM 775 | Malibu |
| Generation: | MM 775 | Malibu IV Sedan |
| Engine / modification: | 2.1 D XDB (62 Hp) | 3.8 V6 (110 Hp) CAT Automatic |
| Production start: | 1992 year | 1979 year |
| Production end: | 2000 year | 1980 year |
| Coupe type: | Off-road vehicle | Sedan |
| Num. of Doors: | 5 | 4 |
| Num. of seats: | 8 | 6 |
| Fuel Type: | Diesel | Petrol (Gasoline) |
| Fuel tank volume: | 60 l | 68 l |
| Power: | 62 hp | 110 hp |
| Max power in: | 4500 rpm. | 3800 rpm. |
| Maximum speed: | 106 km/h | |
| Torque: | 121 Nm @ 2000 rpm. | 258 Nm @ 1600 rpm. |
| Engine position: | Front, longitudinal | Front, longitudinal |
| Engine displacement: | 2112 cm3 | 3791 cm3 |
| Fuel System: | Diesel - Standard diesel injection (SDI) | Carburettor |
| Position of cylinders: | Inline | V engine |
| Valvetrain: | OHV | |
| Number of cylinders: | 4 | 6 |
| Number of valves per cylinder: | 2 | 2 |
| Compression ratio: | 22.4 | 8 |
| Piston Stroke: | 83 mm | 86.4 mm |
| Cylinder Bore: | 90 mm | 96.5 mm |
| Wheel Drive: | All wheel drive (4x4) | Rear wheel drive |
| Number of Gears (automatic transmission): | 4 | 3 |
| Length: | 4190 mm | 4895 mm |
| Width: | 1660 mm | 1816 mm |
| Height: | 1940 mm | 1354 mm |
| Wheelbase: | 2680 mm | 2745 mm |
| Front track: | 1346 mm | 1486 mm |
| Rear (Back) track: | 1346 mm | 1467 mm |
| Ride height(clearance): | 137 mm | |
| Approach angle: | 23 ° | |
| Departure angle: | 16 ° | |
| Ramp angle: | 14 ° | |
| Front overhang: | 915 mm | |
| Rear overhang: | 1235 mm | |
| Maximum amount of Luggage (trunk): | 470 l | |
| Front suspension: | The spring | Independent, Spring McPherson, with stabilizer |
| Rear suspension: | The spring | |
| Max weight: | 2245 kg | |
| Front brakes: | Drum | Ventilated discs |
| Rear brakes: | Drum | Drum |
| Kerb Weight: | 1540 kg | 1412 kg |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 12.2 m | |
| Tire size: | 185/75 R14 | |
| Wheel rims size: | 6.0J x 14 |