Comparison Land Rover Discovery IV (facelift 2013) 3.0 V6 (340 Hp) AWD Automatic & Toyota Tercel (L1,L2) 1.3 (AL11) (65 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Land Rover | Toyota |
| Model: | Discovery | Tercel |
| Generation: | Discovery IV (facelift 2013) | Tercel (L1,L2) |
| Engine / modification: | 3.0 V6 (340 Hp) AWD Automatic | 1.3 (AL11) (65 Hp) |
| Production start: | 2013 year | 1978 year |
| Production end: | 1982 year | |
| Coupe type: | SUV | Sedan |
| Num. of Doors: | 5 | |
| Num. of seats: | 5/7 | |
| Fuel consumption / economy - urban: | 14.4 l/100 km | |
| Fuel consumption / economy - extra urban: | 9.9 l/100 km | |
| Fuel consumption / economy - combined: | 11.5 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Drag coefficient: | 0.40 | |
| Fuel tank volume: | 86.3 l | |
| Emission standard: | EURO V | |
| CO2 emissions: | 269 g/km | |
| Power: | 340 hp | 65 hp |
| Max power in: | 6500 rpm. | |
| Maximum speed: | 195 km/h | |
| Acceleration from 0 to 100 km/h: | 8.1 sec | |
| Torque: | 450 Nm/3500-5000 rpm. | |
| Engine position: | Front, longitudinal | |
| Engine displacement: | 2995 cm3 | |
| Aspiration / Turbine: | Mechanical supercharging (Compressor) | |
| Position of cylinders: | V engine | |
| Valvetrain: | DIVCT | |
| Number of cylinders: | 6 | |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 10.5 | |
| Piston Stroke: | 89 mm | |
| Cylinder Bore: | 84.5 mm | |
| Wheel Drive: | All wheel drive (4x4) | |
| Number of Gears (automatic transmission): | 8 | |
| Length: | 4829 mm | |
| Width: | 1915 mm | |
| Width with mirrors folded: | 2053 mm | |
| Height: | 1887 mm | |
| Wheelbase: | 2885 mm | |
| Approach angle: | 36.2 ° | |
| Departure angle: | 29.6 ° | |
| Front suspension: | Double wishbone | |
| Rear suspension: | Double wishbone | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Ventilated discs | |
| Kerb Weight: | 2565 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Power steering: | Electric Steering | |
| Minimum turning circle (turning diameter): | 11.8 m |