Comparison Lancia Kappa Coupe (838) 2.0 20V (155 Hp) & Opel Insignia Sedan (facelift 2013) 2.0 CDTI (170 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Lancia | Opel |
| Model: | Kappa | Insignia |
| Generation: | Kappa Coupe (838) | Insignia Sedan (facelift 2013) |
| Engine / modification: | 2.0 20V (155 Hp) | 2.0 CDTI (170 Hp) |
| Production start: | 1996 year | 2015 year |
| Production end: | 2000 year | |
| Coupe type: | Coupe | Sedan |
| Num. of Doors: | 4 | |
| Num. of seats: | 5 | |
| Fuel consumption / economy - urban: | 5.6-5.5 l/100 km | |
| Fuel consumption / economy - extra urban: | 3.8-3.6 l/100 km | |
| Fuel consumption / economy - combined: | 4.5-4.3 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Diesel |
| Fuel tank volume: | 70 l | |
| Emission standard: | EURO VI | |
| CO2 emissions: | 118-114 g/km | |
| Power: | 155 hp | 170 hp |
| Max power in: | 3750 rpm. | |
| Maximum speed: | 225 km/h | |
| Acceleration from 0 to 100 km/h: | 9.4 sec | |
| Torque: | 400 Nm/1750-2500 rpm. | |
| Engine position: | Front, transverse | |
| Engine displacement: | 1956 cm3 | |
| Fuel System: | Diesel Commonrail | |
| Aspiration / Turbine: | Turbo / Intercooler (Turbocharging / Intercooler) | |
| Position of cylinders: | Inline | |
| Number of cylinders: | 4 | |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 16 | |
| Piston Stroke: | 90.4 mm | |
| Cylinder Bore: | 83 mm | |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (manual transmission): | 6 | |
| Length: | 4842 mm | |
| Width: | 1856 mm | |
| Width including mirrors: | 2084 mm | |
| Height: | 1498 mm | |
| Wheelbase: | 2737 mm | |
| Front track: | 1587 mm | |
| Rear (Back) track: | 1590 mm | |
| Minimum volume of Luggage (trunk): | 500 l | |
| Maximum amount of Luggage (trunk): | 1015 l | |
| Max weight: | 2180 kg | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| Kerb Weight: | 1589 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Power steering: | Electric Steering | |
| Max. roof load: | 100 kg | |
| Minimum turning circle (turning diameter): | 11.40 m | |
| Permitted trailer load with brakes (12%): | 1800 kg | |
| Permitted trailer load without brakes: | 750 kg |