Comparison Lancia Kappa (838) 3.0 24V (204 Hp) & Isuzu Mu 2.8 DT (110 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Lancia | Isuzu |
| Model: | Kappa | Mu |
| Generation: | Kappa (838) | Mu |
| Engine / modification: | 3.0 24V (204 Hp) | 2.8 DT (110 Hp) |
| Production start: | 1994 year | 1989 year |
| Production end: | 2000 year | 1998 year |
| Coupe type: | Sedan | Off-road vehicle |
| Num. of Doors: | 4 | 3 |
| Num. of seats: | 5 | 4 |
| Fuel consumption / economy - urban: | 17.5 l/100 km | |
| Fuel consumption / economy - extra urban: | 8.9 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Diesel |
| Fuel tank volume: | 70 l | 83 l |
| Power: | 204 hp | 110 hp |
| Max power in: | 6300 rpm. | 3600 rpm. |
| Maximum speed: | 225 km/h | |
| Acceleration from 0 to 100 km/h: | 8 sec | |
| Torque: | 270 Nm @ 4500 rpm. | 226 Nm @ 2300 rpm. |
| Model Engine: | 4JB1-T | |
| Engine position: | Front, transverse | |
| Engine displacement: | 2959 cm3 | 2771 cm3 |
| Fuel System: | Multi-point injection | Diesel Commonrail |
| Aspiration / Turbine: | Turbocharging | |
| Position of cylinders: | V engine | Inline |
| Valvetrain: | DOHC | |
| Number of cylinders: | 6 | 4 |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 10 | 17 |
| Piston Stroke: | 72.6 mm | 102 mm |
| Cylinder Bore: | 93 mm | 93 mm |
| Wheel Drive: | Front wheel drive | All wheel drive (4x4) |
| Number of Gears (automatic transmission): | - | 4 |
| Number of Gears (manual transmission): | 5 | |
| Length: | 4687 mm | 4135 mm |
| Width: | 1826 mm | 1780 mm |
| Height: | 1462 mm | 1675 mm |
| Wheelbase: | 2700 mm | 2330 mm |
| Front track: | 1547 mm | 1450 mm |
| Rear (Back) track: | 1535 mm | 1460 mm |
| Minimum volume of Luggage (trunk): | 525 l | |
| Front suspension: | Wishbone | |
| Rear suspension: | The depreciated rack | |
| Max weight: | 2030 kg | |
| Front brakes: | Ventilated discs | Ventilated discs |
| Rear brakes: | Disc | Disc |
| Kerb Weight: | 1520 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | Steering rack and pinion |
| Power steering: | Hydraulic Steering | Hydraulic Steering |
| Minimum turning circle (turning diameter): | 10.6 m | |
| Tire size: | 215/55R16 |