Comparison Lancia Beta H.p.e. (828 BF) 2000 Volumex (135 Hp) & Honda Crossroad 1.8 (140 Hp) & Cupra Formentor 2.0 TSI (245 Hp) DSG
Add car |
Remove car |
Remove car |
Remove car |
| Brand: | Lancia | Honda | Cupra |
| Model: | Beta | Crossroad | Formentor |
| Generation: | Beta H.p.e. (828 BF) | Crossroad | Formentor |
| Engine / modification: | 2000 Volumex (135 Hp) | 1.8 (140 Hp) | 2.0 TSI (245 Hp) DSG |
| Production start: | 1983 year | 2008 year | 2021 year |
| Production end: | 1984 year | 2010 year | |
| Coupe type: | Crossover | SUV | |
| Num. of Doors: | 5 | 5 | |
| Num. of seats: | 7 | 5 | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 50 l | ||
| Combined fuel consumption (WLTP): | 7.7-7.9 l/100 km | ||
| Emission standard: | Euro 6d | ||
| Power: | 135 hp | 140 hp | 245 hp |
| Max power in: | 5250-6500 rpm. | ||
| Maximum speed: | 238 km/h | ||
| Acceleration from 0 to 100 km/h: | 6.8 sec | ||
| CO2 emissions (WLTP): | 174 g/km | ||
| Torque: | 370 Nm @ 1600-4300 rpm. | ||
| Model Engine: | DNP | ||
| Engine displacement: | 1984 cm3 | ||
| Fuel System: | Direct injection | ||
| Position of cylinders: | Inline | ||
| Number of cylinders: | 4 | ||
| Number of valves per cylinder: | 4 | ||
| Compression ratio: | 9.6 | ||
| Piston Stroke: | 92.8 mm | ||
| Cylinder Bore: | 82.5 mm | ||
| Wheel Drive: | Front wheel drive | ||
| Number of Gears (automatic transmission): | 7 DSG | ||
| Length: | 4285 mm | 4450 mm | |
| Width: | 1775 mm | 1839 mm | |
| Width including mirrors: | 1992 mm | ||
| Height: | 1669 mm | 1528 mm | |
| Wheelbase: | 2700 mm | 2680 mm | |
| Front track: | 1585 mm | ||
| Rear (Back) track: | 1559 mm | ||
| Front overhang: | 893 mm | ||
| Rear overhang: | 877 mm | ||
| Minimum volume of Luggage (trunk): | 450 l | ||
| Front suspension: | Independent type McPherson | ||
| Rear suspension: | Multi-link independent | ||
| Max weight: | 2060 kg | ||
| Kerb Weight: | 1481 kg | ||
| Power steering: | Electric Steering | ||
| Permitted trailer load with brakes (8%): | 1800 kg | ||
| Minimum turning circle (turning diameter): | 11.4 m | ||
| Permitted trailer load with brakes (12%): | 1600 kg | ||
| Permitted trailer load without brakes: | 750 kg | ||
| Tire size: | 245/40 R19 94W | ||
| Wheel rims size: | R19 |