Comparison Jaguar F-type Convertible R 5.0 V8 (550 Hp) Automatic & Nissan Langley N12 1.5 (95 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Jaguar | Nissan |
| Model: | F-type | Langley |
| Generation: | F-type Convertible | Langley N12 |
| Engine / modification: | R 5.0 V8 (550 Hp) Automatic | 1.5 (95 Hp) |
| Production start: | 2014 year | 1982 year |
| Production end: | 1986 year | |
| Coupe type: | Cabriolet | Sedan |
| Num. of Doors: | 2 | |
| Num. of seats: | 2 | 5 |
| Fuel consumption / economy - urban: | 15.3 l/100 km | |
| Fuel consumption / economy - extra urban: | 8.0 l/100 km | |
| Fuel consumption / economy - combined: | 10.7 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 70 l | |
| CO2 emissions: | 255 g/km | |
| Power: | 550 hp | 95 hp |
| Max power in: | 6500 rpm. | 6000 rpm. |
| Maximum speed: | 300 km/h | |
| Acceleration from 0 to 100 km/h: | 4.2 sec | |
| Torque: | 680 Nm/3500 rpm. | |
| Engine position: | Front, longitudinal | |
| Engine displacement: | 5000 cm3 | 1487 cm3 |
| Fuel System: | Direct injection | |
| Aspiration / Turbine: | Mechanical supercharging (Compressor) | |
| Position of cylinders: | V engine | |
| Number of cylinders: | 8 | |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 9.5 | |
| Piston Stroke: | 93 mm | |
| Cylinder Bore: | 92.5 mm | |
| Wheel Drive: | Rear wheel drive | |
| Number of Gears (automatic transmission): | 8 | |
| Length: | 4470 mm | 3975 mm |
| Width: | 1923 mm | 1620 mm |
| Width including mirrors: | 2042 mm | |
| Height: | 1308 mm | 1390 mm |
| Wheelbase: | 2622 mm | 2415 mm |
| Front track: | 1597 mm | |
| Rear (Back) track: | 1649 mm | |
| Ride height(clearance): | 108 mm | |
| Minimum volume of Luggage (trunk): | 196.2 l | |
| Front suspension: | Double wishbone | |
| Rear suspension: | Double wishbone | |
| Max weight: | 2050 kg | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| Kerb Weight: | 1665 kg | 850 kg |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 10.7 m |