Comparison Hyundai Santa Fe II (CM, facelift 2009) 2.4 (174 Hp) 4WD & Kia Ceed III Sportswagon 1.6 CRDi (136 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Hyundai | Kia |
| Model: | Santa Fe | Cee'd |
| Generation: | Santa Fe II (CM, facelift 2009) | Ceed III Sportswagon |
| Engine / modification: | 2.4 (174 Hp) 4WD | 1.6 CRDi (136 Hp) |
| Production start: | 2009 year | 2018 year |
| Production end: | 2012 year | |
| Coupe type: | SUV | Combi |
| Powertrain Architecture: | Internal Combustion engine | |
| Num. of Doors: | 5 | 5 |
| Num. of seats: | 5 | 5 |
| Fuel Type: | Petrol (Gasoline) | Diesel |
| Drag coefficient: | 0.38 | |
| Fuel tank volume: | 75 l | 50 l |
| Emission standard: | Euro 5 | Euro 6d TEMP |
| Power: | 174 hp | 136 hp |
| Max power in: | 6000 rpm. | |
| Maximum speed: | 190 km/h | |
| Acceleration from 0 to 100 km/h: | 11.2 sec | |
| Torque: | 226 Nm @ 3750 rpm. | 280 Nm |
| Model Engine: | Theta II / G4KE | |
| Engine position: | Front, transverse | |
| Engine displacement: | 2359 cm3 | 1589 cm3 |
| Engine oil capacity: | 4.6 l | |
| Coolant: | 6.5 l | |
| Fuel System: | Diesel Commonrail | |
| Aspiration / Turbine: | Naturally aspirated engine | Turbocharging |
| Position of cylinders: | Inline | |
| Valvetrain: | DOHC | |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 4 | 4 |
| Compression ratio: | 10.5 | |
| Piston Stroke: | 97 mm | |
| Cylinder Bore: | 88 mm | |
| Wheel Drive: | All wheel drive (4x4) | Front wheel drive |
| Number of Gears (manual transmission): | 6 | |
| Length: | 4660 mm | 4600 mm |
| Width: | 1890 mm | 1800 mm |
| Height: | 1760 mm | 1465 mm |
| Wheelbase: | 2700 mm | 2650 mm |
| Front track: | 1615 mm | |
| Rear (Back) track: | 1620 mm | |
| Ride height(clearance): | 200 mm | |
| Approach angle: | 24.6 ° | |
| Departure angle: | 21.6 ° | |
| Front overhang: | 930 mm | 880 mm |
| Rear overhang: | 1030 mm | 1070 mm |
| Wading depth: | 500 mm | |
| Minimum volume of Luggage (trunk): | 528 l | 600 l |
| Front suspension: | Independent, Spring McPherson, with stabilizer | |
| Max weight: | 2505 kg | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| Kerb Weight: | 1737-1817 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Power steering: | Hydraulic Steering | |
| Max. roof load: | 100 kg | |
| Permitted trailer load with brakes (8%): | 2400 kg | |
| Minimum turning circle (turning diameter): | 10.9 m | |
| Permitted trailer load with brakes (12%): | 2000 kg | |
| Permitted trailer load without brakes: | 750 kg | |
| Permitted towbar download: | 80 kg | |
| Tire size: | 235/65 R17 | 195/65 R15; 205/55 R16; 225/45 R17 |
| Wheel rims size: | 7J x 17 | R15; R16; R17 |