Comparison Hyundai i30 III CW (facelift 2020) 1.6 CRDi (136 Hp) MHEV & Mercedes-Benz W112 Cabriolet 300 SE (160 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Hyundai | Mercedes-Benz |
| Model: | i30 | W112 |
| Generation: | i30 III CW (facelift 2020) | W112 Cabriolet |
| Engine / modification: | 1.6 CRDi (136 Hp) MHEV | 300 SE (160 Hp) |
| Production start: | 2020 year | 1962 year |
| Production end: | 1964 year | |
| Coupe type: | Cabriolet | |
| Num. of Doors: | 5 | 2 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - combined: | 13 l/100 km | |
| Fuel Type: | Diesel | Petrol (Gasoline) |
| Fuel tank volume: | 65 l | |
| Emission standard: | EURO 6d TEMP | |
| Power: | 136 hp | 160 hp |
| Max power in: | 4000 rpm. | 5000 rpm. |
| Maximum speed: | 200 km/h | 185 km/h |
| Acceleration from 0 to 100 km/h: | 10.2 sec | 12.5 sec |
| Torque: | 280 Nm @ 1500-3000 rpm. | 251 Nm @ 3800 rpm. |
| Model Engine: | M 189 I / 189.985 | |
| Engine position: | Front, longitudinal | |
| Engine displacement: | 1598 cm3 | 2996 cm3 |
| Fuel System: | Diesel Commonrail | |
| Aspiration / Turbine: | Turbocharger / Intercooler | |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | SOHC | |
| Number of cylinders: | 4 | 6 |
| Number of valves per cylinder: | 4 | 2 |
| Compression ratio: | 8.7 | |
| Piston Stroke: | 88 mm | |
| Cylinder Bore: | 85 mm | |
| Wheel Drive: | Front wheel drive | Rear wheel drive |
| Number of Gears (manual transmission): | 6 | 4 |
| Length: | 4585 mm | 4880 mm |
| Width: | 1795 mm | 1845 mm |
| Height: | 1465-1475 mm | 1400 mm |
| Wheelbase: | 2650 mm | 2750 mm |
| Front track: | 1482 mm | |
| Rear (Back) track: | 1490 mm | |
| Minimum volume of Luggage (trunk): | 602 l | |
| Maximum amount of Luggage (trunk): | 1650 l | |
| Front suspension: | Independent, Spring McPherson, with stabilizer | |
| Rear suspension: | Multi-link independent | |
| Max weight: | 1920 kg | 2160 kg |
| Front brakes: | Disc | |
| Rear brakes: | Disc | |
| Kerb Weight: | 1340 kg | 1690 kg |
| Steering type: | Steering rack and pinion | Cone worm with recirculation balls |
| Max. roof load: | 80 kg | |
| Permitted trailer load with brakes (12%): | 1500 kg | |
| Permitted trailer load without brakes: | 650 kg | |
| Tire size: | 6J x 14 |