Comparison Hyundai Genesis Coupe 3.8 V6 24V (306 Hp) & Daihatsu Boon 1.0 CL (71 Hp) Automatic
Add car |
Remove car |
Remove car |
| Brand: | Hyundai | Daihatsu |
| Model: | Genesis | Boon |
| Generation: | Genesis Coupe | Boon |
| Engine / modification: | 3.8 V6 24V (306 Hp) | 1.0 CL (71 Hp) Automatic |
| Production start: | 2009 year | 2004 year |
| Production end: | 2012 year | 2010 year |
| Coupe type: | Coupe | Hatchback |
| Num. of Doors: | 2 | 5 |
| Num. of seats: | 2+2 | 5 |
| Fuel consumption / economy - extra urban: | 9.4 l/100 km | |
| Fuel consumption / economy - combined: | 4.8 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 40 l | |
| Emission standard: | Euro 4 | |
| Power: | 306 hp | 71 hp |
| Max power in: | 6300 rpm. | 6000 rpm. |
| Maximum speed: | 240 km/h | |
| Acceleration from 0 to 100 km/h: | 6 sec | |
| Torque: | 361 Nm @ 4700 rpm. | 94 Nm @ 3600 rpm. |
| Model Engine: | Lambda | 1KR-FE |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 3778 cm3 | 996 cm3 |
| Fuel System: | Multi-point injection | Multi-point injection |
| Position of cylinders: | V engine | Inline |
| Valvetrain: | DOHC | DOHC |
| Number of cylinders: | 6 | 3 |
| Number of valves per cylinder: | 4 | 4 |
| Compression ratio: | 10.5 | |
| Piston Stroke: | 83.9 mm | |
| Cylinder Bore: | 71 mm | |
| Wheel Drive: | Rear wheel drive | Front wheel drive |
| Number of Gears (automatic transmission): | 6 | 4 |
| Number of Gears (manual transmission): | 6 | |
| Length: | 4630 mm | 3595 mm |
| Width: | 1864 mm | 1665 mm |
| Height: | 1379 mm | 1535 mm |
| Wheelbase: | 2820 mm | 2440 mm |
| Front track: | 1599 mm | |
| Rear (Back) track: | 1615 mm | |
| Front suspension: | Independent multi-link | The depreciated rack |
| Rear suspension: | Independent, spring multi-link with stabilizer | Torsion |
| Front brakes: | Ventilated discs | Ventilated discs |
| Rear brakes: | Disc | Drum |
| Kerb Weight: | 1560 kg | 900 kg |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 8.6 m | |
| Tire size: | 155/80R13 79S |