Comparison HuangHai Antelope 2.2i 2WD (102 Hp) & Nissan Cube (Z12) 1.6 (110 Hp)
Add car |
Remove car |
Remove car |
| Brand: | HuangHai | Nissan |
| Model: | Antelope | Cube |
| Generation: | Antelope | Cube (Z12) |
| Engine / modification: | 2.2i 2WD (102 Hp) | 1.6 (110 Hp) |
| Production start: | 2006 year | 2010 year |
| Production end: | 2011 year | |
| Coupe type: | Pick-up | |
| Powertrain Architecture: | Internal Combustion engine | |
| Num. of Doors: | 4 | 5 |
| Num. of seats: | 5 | |
| Fuel consumption / economy - urban: | 8.3 l/100 km | |
| Fuel consumption / economy - extra urban: | 5.6 l/100 km | |
| Fuel consumption / economy - combined: | 6.6 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 52 l | |
| Emission standard: | Euro 5 | |
| CO2 emissions: | 151 g/km | |
| Power: | 102 hp | 110 hp |
| Max power in: | 4600 rpm. | 6000 rpm. |
| Maximum speed: | 175 km/h | |
| Acceleration from 0 to 100 km/h: | 11.3 sec | |
| Torque: | 193 Nm @ 2500 rpm. | 153 Nm @ 4400 rpm. |
| Model Engine: | HR16DE | |
| Engine position: | Front, transverse | |
| Engine displacement: | 2237 cm3 | 1598 cm3 |
| Engine oil capacity: | 4.8 l | |
| Coolant: | 5.6 l | |
| Fuel System: | Multi-point indirect injection | |
| Aspiration / Turbine: | Naturally aspirated engine | |
| Position of cylinders: | Inline | |
| Valvetrain: | DOHC | |
| Number of cylinders: | 4 | |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 10.7 | |
| Piston Stroke: | 83.6 mm | |
| Cylinder Bore: | 78 mm | |
| Wheel Drive: | Rear wheel drive | Front wheel drive |
| Number of Gears (manual transmission): | 5 | 5 |
| Length: | 5145 mm | 3980 mm |
| Width: | 1725 mm | 1695 mm |
| Height: | 1690 mm | 1670 mm |
| Wheelbase: | 2530 mm | |
| Front track: | 1475 mm | |
| Rear (Back) track: | 1480 mm | |
| Front overhang: | 790 mm | |
| Rear overhang: | 660 mm | |
| Minimum volume of Luggage (trunk): | 260 l | |
| Maximum amount of Luggage (trunk): | 1563 l | |
| Front suspension: | Independent, Spring McPherson, with stabilizer | |
| Max weight: | 1700 kg | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| Kerb Weight: | 1265-1321 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Power steering: | Hydraulic Steering | Hydraulic Steering |
| Max. roof load: | 40 kg | |
| Minimum turning circle (turning diameter): | 10.2 m | |
| Permitted trailer load with brakes (12%): | 1000 kg | |
| Permitted trailer load without brakes: | 510 kg | |
| Permitted towbar download: | 40 kg | |
| Tire size: | 195/60 R15; 195/55 R16 | |
| Wheel rims size: | 6J x 15; 6J x 16 |