Comparison Honda Integra IV (DC5, facelift 2004) 2.0 (160 Hp) Automatic & Audi 200 (C2, Typ 43) 2.1 5T (170 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Honda | Audi |
| Model: | Integra | 200 |
| Generation: | Integra IV (DC5, facelift 2004) | 200 (C2, Typ 43) |
| Engine / modification: | 2.0 (160 Hp) Automatic | 2.1 5T (170 Hp) |
| Production start: | 2004 year | 1979 year |
| Production end: | 2006 year | 1981 year |
| Coupe type: | Sedan | |
| Powertrain Architecture: | Internal Combustion engine | |
| Num. of Doors: | 3 | 4 |
| Num. of seats: | 4 | 5 |
| Fuel consumption / economy - combined: | 8.1 l/100 km | 11.3 l/100 km |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Drag coefficient: | 0.42 | |
| Fuel tank volume: | 50 l | 75 l |
| Power: | 160 hp | 170 hp |
| Max power in: | 6500 rpm. | 5300 rpm. |
| Maximum speed: | 202 km/h | |
| Acceleration from 0 to 100 km/h: | 8.7 sec | |
| Torque: | 191 Nm @ 4000 rpm. | 265 Nm @ 3300 rpm. |
| Model Engine: | K20A3 | |
| Engine position: | Front, transverse | |
| Engine displacement: | 1998 cm3 | 2144 cm3 |
| Engine oil capacity: | 4.2 l | |
| Coolant: | 6.4 l | |
| Fuel System: | Multi-point indirect injection | Multi-point injection |
| Aspiration / Turbine: | Naturally aspirated engine | Turbocharging |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | DOHC i-VTEC | |
| Number of cylinders: | 4 | 5 |
| Number of valves per cylinder: | 4 | 2 |
| Compression ratio: | 9.8 | 7 |
| Piston Stroke: | 86 mm | 86.4 mm |
| Cylinder Bore: | 86 mm | 79.5 mm |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (manual transmission): | 5 | |
| Length: | 4400 mm | 4695 mm |
| Width: | 1725 mm | 1768 mm |
| Height: | 1395 mm | 1390 mm |
| Wheelbase: | 2676 mm | |
| Front track: | 1475 mm | |
| Rear (Back) track: | 1453 mm | |
| Ride height(clearance): | 125 mm | |
| Minimum volume of Luggage (trunk): | 640 l | |
| Max weight: | 1765 kg | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| Kerb Weight: | 1210 kg | 1325 kg |
| Steering type: | Steering rack and pinion | |
| Power steering: | Hydraulic Steering | |
| Minimum turning circle (turning diameter): | 11.6 m | 11.3 m |
| Permitted trailer load with brakes (12%): | 450 kg | |
| Permitted trailer load without brakes: | 450 kg | |
| Tire size: | 205/55 R16 | 205/60 R15 |
| Wheel rims size: | 6.5J x 16 | R15 |