Comparison Holden UTE II 5.7 V8 (340 Hp) & Holden Calais (VT) 5.0 i V8 (243 Hp) & Holden Rodeo 3.5 i V6 24V 2WD (199 Hp)
Add car |
Remove car |
Remove car |
Remove car |
| Brand: | Holden | Holden | Holden |
| Model: | Ute | Calais | Rodeo |
| Generation: | UTE II | Calais (VT) | Rodeo |
| Engine / modification: | 5.7 V8 (340 Hp) | 5.0 i V8 (243 Hp) | 3.5 i V6 24V 2WD (199 Hp) |
| Production start: | 2003 year | 2000 year | 1988 year |
| Production end: | 2007 year | 2006 year | 2003 year |
| Coupe type: | Pick-up | Sedan | Pick-up |
| Num. of Doors: | 2 | 4 | 2 |
| Num. of seats: | 2 | 5 | 2 |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 73 l | ||
| Power: | 340 hp | 243 hp | 199 hp |
| Max power in: | 5600 rpm. | 4800 rpm. | |
| Torque: | 470 Nm/4800 rpm. | 400 Nm @ 3600 rpm. | |
| Engine position: | Front, longitudinal | Front, longitudinal | |
| Engine displacement: | 5665 cm3 | 4981 cm3 | |
| Fuel System: | Multi-point injection | Multi-point injection | |
| Position of cylinders: | V engine | V engine | |
| Number of cylinders: | 8 | 8 | |
| Number of valves per cylinder: | 2 | 2 | |
| Compression ratio: | 8.8 | ||
| Piston Stroke: | 76.8 mm | ||
| Cylinder Bore: | 101.6 mm | ||
| Wheel Drive: | Front wheel drive | Rear wheel drive | |
| Number of Gears (automatic transmission): | 4 | ||
| Number of Gears (manual transmission): | 6 | ||
| Length: | 5052 mm | 4885 mm | |
| Width: | 1844 mm | 1840 mm | |
| Height: | 1476 mm | 1450 mm | |
| Wheelbase: | 2939 mm | 2790 mm | |
| Front track: | 1570 mm | ||
| Rear (Back) track: | 1585 mm | ||
| Minimum volume of Luggage (trunk): | 475 l | ||
| Front suspension: | Coil spring | ||
| Rear suspension: | Helical spring | ||
| Front brakes: | Ventilated discs | Ventilated discs | |
| Rear brakes: | Disc | Disc | |
| Kerb Weight: | 1630 kg | ||
| ABS: | yes | yes | |
| Power steering: | Hydraulic Steering | ||
| Tire size: | 205/65 R15 |