Comparison Ford Taunus (GBTK) 1600 (72 Hp) & Volvo V40 Cross Country 2.5 T5 (254 Hp) Automatic
Add car |
Remove car |
Remove car |
| Brand: | Ford | Volvo |
| Model: | Taunus | V40 |
| Generation: | Taunus (GBTK) | V40 Cross Country |
| Engine / modification: | 1600 (72 Hp) | 2.5 T5 (254 Hp) Automatic |
| Production start: | 1970 year | 2013 year |
| Production end: | 1975 year | |
| Coupe type: | Sedan | Crossover |
| Num. of Doors: | 5 | |
| Num. of seats: | 5 | |
| Fuel consumption / economy - urban: | 11.1 l/100 km | |
| Fuel consumption / economy - extra urban: | 5.9 l/100 km | |
| Fuel consumption / economy - combined: | 7.8 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 57 l | |
| Emission standard: | EURO V | |
| CO2 emissions: | 182 g/km | |
| Power: | 72 hp | 254 hp |
| Max power in: | 5400 rpm. | |
| Maximum speed: | 240 km/h | |
| Acceleration from 0 to 100 km/h: | 6.1 sec | |
| Torque: | 360 Nm/1800-4200 rpm. | |
| Model Engine: | B5254T12 | |
| Engine position: | Front, transverse | |
| Engine displacement: | 2497 cm3 | |
| Fuel System: | Direct injection | |
| Aspiration / Turbine: | Turbocharging | |
| Position of cylinders: | Inline | |
| Valvetrain: | DOHC | |
| Number of cylinders: | 5 | |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 9.5 | |
| Piston Stroke: | 92.3 mm | |
| Cylinder Bore: | 83 mm | |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (automatic transmission): | 6 | |
| Length: | 4370 mm | |
| Width: | 1857 mm | |
| Height: | 1470 mm | |
| Wheelbase: | 2646 mm | |
| Front track: | 1552 - 1547 mm | |
| Rear (Back) track: | 1540 - 1535 mm | |
| Ride height(clearance): | 145 mm | |
| Minimum volume of Luggage (trunk): | 335 l | |
| Front suspension: | Independent, Spring McPherson, with stabilizer | |
| Rear suspension: | Independent, spring | |
| Max weight: | 2010 kg | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| Kerb Weight: | 1569 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 11.2 - 11.6 m |