Comparison Ford Sierra Turnier II 1.6 (75 Hp) & Seat Leon III ST 1.4 TSI (125 Hp) start/stop
Add car |
Remove car |
Remove car |
| Brand: | Ford | Seat |
| Model: | Sierra | Leon |
| Generation: | Sierra Turnier II | Leon III ST |
| Engine / modification: | 1.6 (75 Hp) | 1.4 TSI (125 Hp) start/stop |
| Production start: | 1987 year | 2014 year |
| Production end: | 1993 year | 2016 year |
| Coupe type: | Combi | Combi |
| Num. of Doors: | 5 | 5 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 6.6 l/100 km | |
| Fuel consumption / economy - extra urban: | 4.6 l/100 km | |
| Fuel consumption / economy - combined: | 5.3 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 60 l | |
| Emission standard: | Euro 6 | |
| CO2 emissions: | 123 g/km | |
| Power: | 75 hp | 125 hp |
| Max power in: | 5000-6000 rpm. | |
| Maximum speed: | 202 km/h | |
| Acceleration from 0 to 100 km/h: | 9.6 sec | |
| Torque: | 200 Nm @ 1400-4000 rpm. | |
| Model Engine: | CMBA, CXSA | |
| Engine position: | Front, transverse | |
| Engine displacement: | 1395 cm3 | |
| Engine oil capacity: | 4 l | |
| Fuel System: | Direct injection | |
| Aspiration / Turbine: | Turbocharging | |
| Position of cylinders: | Inline | |
| Number of cylinders: | 4 | |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 10.5 | |
| Piston Stroke: | 80 mm | |
| Cylinder Bore: | 74.5 mm | |
| Wheel Drive: | Rear wheel drive | Front wheel drive |
| Number of Gears (manual transmission): | 5 | 6 |
| Length: | 4511 mm | 4535 mm |
| Width: | 1720 mm | 1816 mm |
| Height: | 1428 mm | 1451 mm |
| Wheelbase: | 2608 mm | 2636 mm |
| Front track: | 1452 mm | 1549 mm |
| Rear (Back) track: | 1468 mm | 1520 mm |
| Minimum volume of Luggage (trunk): | 587 l | |
| Maximum amount of Luggage (trunk): | 1470 l | |
| Max weight: | 1840 kg | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Drum | |
| Kerb Weight: | 1180 kg | 1269 kg |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | Steering rack and pinion |
| Minimum turning circle (turning diameter): | 10 m |