Comparison Ford Sierra Turnier I 1.6 (75 Hp) & Toyota GT 86 2.0 D-4S (200 Hp) Automatic
Add car |
Remove car |
Remove car |
| Brand: | Ford | Toyota |
| Model: | Sierra | 86 |
| Generation: | Sierra Turnier I | GT 86 |
| Engine / modification: | 1.6 (75 Hp) | 2.0 D-4S (200 Hp) Automatic |
| Production start: | 1982 year | 2012 year |
| Production end: | 1986 year | |
| Coupe type: | Combi | Coupe |
| Num. of Doors: | 5 | 2 |
| Num. of seats: | 5 | 4 |
| Fuel consumption / economy - urban: | 9.6 l/100 km | |
| Fuel consumption / economy - extra urban: | 5.7 l/100 km | |
| Fuel consumption / economy - combined: | 7.1 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 60 l | 50 l |
| Emission standard: | EURO V J | |
| Power: | 75 hp | 200 hp |
| Max power in: | 7000 rpm. | |
| Maximum speed: | 210 km/h | |
| Acceleration from 0 to 100 km/h: | 8.2 sec | |
| Torque: | 205 Nm/6400-6600 rpm. | |
| Engine position: | Front, longitudinal | |
| Engine displacement: | 1998 cm3 | |
| Fuel System: | Direct injection | |
| Position of cylinders: | Boxer | |
| Valvetrain: | DOHC | |
| Number of cylinders: | 4 | |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 12.5 | |
| Piston Stroke: | 86 mm | |
| Cylinder Bore: | 86 mm | |
| Wheel Drive: | Rear wheel drive | Rear wheel drive |
| Number of Gears (automatic transmission): | 6 | |
| Number of Gears (manual transmission): | 5 | |
| Length: | 4511 mm | 4240 mm |
| Width: | 1720 mm | 1775 mm |
| Height: | 1428 mm | 1285 mm |
| Wheelbase: | 2608 mm | 2570 mm |
| Front track: | 1452 mm | 1520 mm |
| Rear (Back) track: | 1468 mm | 1540 mm |
| Minimum volume of Luggage (trunk): | 243 l | |
| Front suspension: | Independent, Spring McPherson, with stabilizer | |
| Rear suspension: | Double wishbone | |
| Max weight: | 1700 kg | |
| Front brakes: | Ventilated discs | Ventilated discs |
| Rear brakes: | Disc | Ventilated discs |
| Kerb Weight: | 1263 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | Steering rack and pinion |
| Minimum turning circle (turning diameter): | 10 m | 10.8 m |