Car technical specifications and fuel economy / consumption / mpg

Comparison Ford Sierra Hatchback II 2.0i (120 Hp) & Volvo S60 II Cross Country 2.0 D4 (190 Hp) Automatic


Add car
Ford Sierra Hatchback II 2.0i (120 Hp)
Remove car
Volvo S60 II Cross Country 2.0 D4 (190 Hp) Automatic
Remove car
Brand: Ford Volvo
Model: Sierra S60
Generation: Sierra Hatchback II S60 II Cross Country
Engine / modification: 2.0i (120 Hp) 2.0 D4 (190 Hp) Automatic
Production start: 1989 year 2015 year
Production end: 1993 year
Coupe type: Hatchback Sedan
Num. of Doors: 3/5 4
Num. of seats: 5 5
Fuel consumption / economy - combined: 4.6 l/100 km
Fuel Type: Petrol (Gasoline) Diesel
Fuel tank volume: 60 l 67.5 l
Emission standard: EURO VI
CO2 emissions: 120 g/km
Power: 120 hp 190 hp
Max power in: 5600 rpm. 4250 rpm.
Maximum speed: 210 km/h
Acceleration from 0 to 100 km/h: 7.7 sec
Torque: 171 Nm/2500 rpm. 400 Nm/1750-2500 rpm.
Model Engine: D4204T14
Engine position: Front, longitudinal Front, transverse
Engine displacement: 1998 cm3 1969 cm3
Fuel System: Multi-point injection Diesel Commonrail
Aspiration / Turbine: Turbo / Intercooler (Turbocharging / Intercooler)
Position of cylinders: Inline Inline
Valvetrain: DOHC DOHC
Number of cylinders: 4 4
Number of valves per cylinder: 8 4
Compression ratio: 15.8
Piston Stroke: 86 mm 93.2 mm
Cylinder Bore: 86 mm 82 mm
Wheel Drive: Rear wheel drive Front wheel drive
Number of Gears (automatic transmission): 4 6
Number of Gears (manual transmission): 5
Length: 4425 mm 4638 mm
Width: 1694 mm 1899 mm
Height: 1407 mm 1539 mm
Wheelbase: 2608 mm 2774 mm
Front track: 1452 mm 1619-1609 mm
Rear (Back) track: 1468 mm 1577-1567 mm
Ride height(clearance): 201 mm
Minimum volume of Luggage (trunk): 380 l
Front suspension: Independent, Spring McPherson, with stabilizer
Rear suspension: Independent, spring
Max weight: 2230 kg
Front brakes: Ventilated discs Ventilated discs
Rear brakes: Drum Disc
ABS: yes
Steering type: Steering rack and pinion Steering rack and pinion
Power steering: Hydraulic Steering Electric Steering
Minimum turning circle (turning diameter): 10 m 11.8 m