Comparison Ford Scorpio I (GAE,GGE) 2.0 (105 Hp) & Ford S-MAX (facelift 2010) 2.2 Duratorq TDCi (200 Hp) Automatic
Add car |
Remove car |
Remove car |
| Brand: | Ford | Ford |
| Model: | Scorpio | S-MAX |
| Generation: | Scorpio I (GAE,GGE) | S-MAX (facelift 2010) |
| Engine / modification: | 2.0 (105 Hp) | 2.2 Duratorq TDCi (200 Hp) Automatic |
| Production start: | 1985 year | 2010 year |
| Production end: | 1989 year | 2014 year |
| Coupe type: | Sedan | MPV |
| Num. of Doors: | 4 | 5 |
| Num. of seats: | 5 | 7 |
| Fuel consumption / economy - urban: | 9.4 l/100 km | |
| Fuel consumption / economy - extra urban: | 5.8 l/100 km | |
| Fuel consumption / economy - combined: | 7.1 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Diesel |
| Fuel tank volume: | 70 l | 70 l |
| Emission standard: | Euro 5 | |
| Power: | 105 hp | 200 hp |
| Max power in: | 5200 rpm. | |
| Maximum speed: | 183 km/h | 212 km/h |
| Acceleration from 0 to 100 km/h: | 12.3 sec | 8.9 sec |
| Torque: | 157 Nm @ 3500 rpm. | |
| Engine position: | Front, longitudinal | Front, transverse |
| Engine displacement: | 1993 cm3 | |
| Fuel System: | Carburettor | Diesel Commonrail |
| Aspiration / Turbine: | Turbo / Intercooler (Turbocharging / Intercooler) | |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | OHC | |
| Number of cylinders: | 4 | |
| Number of valves per cylinder: | 2 | |
| Piston Stroke: | 77 mm | |
| Cylinder Bore: | 90.8 mm | |
| Wheel Drive: | Rear wheel drive | Front wheel drive |
| Number of Gears (automatic transmission): | 4 | 6 |
| Number of Gears (manual transmission): | 5 | |
| Length: | 4744 mm | 4903 mm |
| Width: | 1766 mm | 2154 mm |
| Height: | 1450 mm | 1660 mm |
| Wheelbase: | 2761 mm | |
| Minimum volume of Luggage (trunk): | 285 l | |
| Maximum amount of Luggage (trunk): | 2000 l | |
| Max weight: | 2505 kg | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| Kerb Weight: | 1560 kg | 1733 kg |
| ABS: | yes | yes |
| Steering type: | Steering rack and pinion | Steering rack and pinion |
| Minimum turning circle (turning diameter): | 10.4 m | 11.9 m |