Comparison Ford S-MAX (facelift 2010) 2.0 Duratorq TDCi (163 Hp) & Ford Scorpio I (GAE,GGE) 2.9i (145 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Ford | Ford |
| Model: | S-MAX | Scorpio |
| Generation: | S-MAX (facelift 2010) | Scorpio I (GAE,GGE) |
| Engine / modification: | 2.0 Duratorq TDCi (163 Hp) | 2.9i (145 Hp) |
| Production start: | 2010 year | 1986 year |
| Production end: | 2014 year | 1994 year |
| Coupe type: | MPV | Sedan |
| Num. of Doors: | 5 | 4 |
| Num. of seats: | 7 | 5 |
| Fuel consumption / economy - urban: | 6.7 l/100 km | |
| Fuel consumption / economy - extra urban: | 4.7 l/100 km | |
| Fuel consumption / economy - combined: | 5.4 l/100 km | |
| Fuel Type: | Diesel | Petrol (Gasoline) |
| Fuel tank volume: | 70 l | 70 l |
| Emission standard: | Euro 5 | |
| Power: | 163 hp | 145 hp |
| Max power in: | 5500 rpm. | |
| Maximum speed: | 205 km/h | 200 km/h |
| Acceleration from 0 to 100 km/h: | 9.5 sec | 9.4 sec |
| Torque: | 229 Nm @ 3000 rpm. | |
| Engine position: | Front, transverse | Front, longitudinal |
| Engine displacement: | 2933 cm3 | |
| Fuel System: | Diesel Commonrail | Multi-point injection |
| Aspiration / Turbine: | Turbo / Intercooler (Turbocharging / Intercooler) | |
| Position of cylinders: | Inline | V engine |
| Valvetrain: | OHC | |
| Number of cylinders: | 6 | |
| Number of valves per cylinder: | 2 | |
| Piston Stroke: | 72 mm | |
| Cylinder Bore: | 93 mm | |
| Wheel Drive: | Front wheel drive | Rear wheel drive |
| Number of Gears (automatic transmission): | 4 | |
| Number of Gears (manual transmission): | 6 | 5 |
| Length: | 4903 mm | 4744 mm |
| Width: | 2154 mm | 1766 mm |
| Height: | 1660 mm | 1450 mm |
| Wheelbase: | 2761 mm | |
| Minimum volume of Luggage (trunk): | 285 l | |
| Maximum amount of Luggage (trunk): | 2000 l | |
| Max weight: | 2505 kg | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| Kerb Weight: | 1690 kg | 1345 kg |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | Steering rack and pinion |
| Power steering: | Hydraulic Steering | |
| Minimum turning circle (turning diameter): | 11.9 m | 10.4 m |