Comparison Ford Mustang Convertible I 2.8 V6 (101 Hp) & Ford Kuga I 2.0 TDCi (136 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Ford | Ford |
| Model: | Mustang | Kuga |
| Generation: | Mustang Convertible I | Kuga I |
| Engine / modification: | 2.8 V6 (101 Hp) | 2.0 TDCi (136 Hp) |
| Production start: | 1964 year | 2008 year |
| Production end: | 1964 year | 2010 year |
| Coupe type: | Cabriolet | SUV |
| Num. of Doors: | 2 | 5 |
| Num. of seats: | 2+2 | 5 |
| Fuel consumption / economy - urban: | 8 l/100 km | |
| Fuel consumption / economy - extra urban: | 5.3 l/100 km | |
| Fuel consumption / economy - combined: | 6.3 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Diesel |
| Fuel tank volume: | 61 l | |
| Emission standard: | Euro 5 | |
| Power: | 101 hp | 136 hp |
| Max power in: | 4400 rpm. | 4000 rpm. |
| Maximum speed: | 182 km/h | |
| Acceleration from 0 to 100 km/h: | 10.6 sec | |
| Torque: | 212 Nm @ 2400 rpm. | 320 Nm @ 2000 rpm. |
| Engine position: | Front, longitudinal | Front, transverse |
| Engine displacement: | 2786 cm3 | 1997 cm3 |
| Engine oil capacity: | 4.3 l | |
| Coolant: | 9 l | |
| Fuel System: | Carburettor | Diesel Commonrail |
| Aspiration / Turbine: | Turbocharging | |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | OHV | - |
| Number of cylinders: | 6 | 4 |
| Number of valves per cylinder: | 2 | 4 |
| Compression ratio: | 8.7 | 18 |
| Piston Stroke: | 74.68 mm | 88 mm |
| Cylinder Bore: | 88.9 mm | 85 mm |
| Wheel Drive: | Part time 4x4 | |
| Number of Gears (manual transmission): | 3 | 6 |
| Length: | 4613 mm | 4443 mm |
| Width: | 1732 mm | 1832 mm |
| Height: | 1298 mm | 1677 mm |
| Wheelbase: | 2763 mm | 2690 mm |
| Front track: | 1407 mm | |
| Rear (Back) track: | 1422 mm | |
| Minimum volume of Luggage (trunk): | 218 l | |
| Front suspension: | Double wishbone | The depreciated rack |
| Rear suspension: | The depreciated rack | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| Kerb Weight: | 1243 kg | 2100 kg |
| ABS: | yes | |
| Steering type: | Cone worm with recirculation balls | Steering rack and pinion |
| Power steering: | Hydraulic Steering | Hydraulic Steering |
| Minimum turning circle (turning diameter): | 11.6 m | |
| Tire size: | Front wheel tires: 165/80 R13 | |
| Wheel rims size: | Front wheel rims: 6.5J x 13 |