Comparison Ford C-MAX II 1.6 Duratorq TDCi (115 Hp) DPF & Mazda 3 III Sedan (BM) 2.0i (120 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Ford | Mazda |
| Model: | C-MAX | 3 |
| Generation: | C-MAX II | 3 III Sedan (BM) |
| Engine / modification: | 1.6 Duratorq TDCi (115 Hp) DPF | 2.0i (120 Hp) |
| Production start: | 2010 year | 2014 year |
| Coupe type: | MPV | Sedan |
| Num. of Doors: | 5 | 4 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 5.4 l/100 km | 6.5 l/100 km |
| Fuel consumption / economy - extra urban: | 4.0 l/100 km | 4.3 l/100 km |
| Fuel consumption / economy - combined: | 4.5 l/100 km | 5.1 l/100 km |
| Fuel Type: | Diesel | Petrol (Gasoline) |
| Fuel tank volume: | 55 l | 51 l |
| Emission standard: | EURO V | EURO V |
| CO2 emissions: | 117 g/km | 119 g/km |
| Power: | 115 hp | 120 hp |
| Max power in: | 4500 rpm. | |
| Maximum speed: | 184 km/h | 198 km/h |
| Acceleration from 0 to 100 km/h: | 11.3 sec | 8.8 sec |
| Torque: | 270 Nm | 210 Nm/4000 rpm. |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 1998 cm3 | |
| Fuel System: | Diesel Commonrail | Direct injection |
| Aspiration / Turbine: | Turbo / Intercooler (Turbocharging / Intercooler) | |
| Position of cylinders: | Inline | Inline |
| Number of cylinders: | 4 | |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 14 | |
| Wheel Drive: | Front wheel drive | Front wheel drive |
| Number of Gears (manual transmission): | 6 | 6 |
| Length: | 4380 mm | 4580 mm |
| Width: | 1828 mm | |
| Width with mirrors folded: | 1795 mm | |
| Width including mirrors: | 2053 mm | |
| Height: | 1626 mm | 1450 mm |
| Wheelbase: | 2700 mm | |
| Ride height(clearance): | 155 mm | |
| Minimum volume of Luggage (trunk): | 432 l | 419 l |
| Maximum amount of Luggage (trunk): | 1684 l | |
| Max weight: | 1915 kg | 1815 kg |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| Kerb Weight: | 1390 kg | 1200 kg |
| ABS: | yes | yes |
| Steering type: | Steering rack and pinion | Steering rack and pinion |
| Minimum turning circle (turning diameter): | 10.7 m |