Comparison Fiat Tipo (160) 1.6 i.e. (90 Hp) & Fiat Punto II (188, facelift 2003) 3dr 1.2 (80 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Fiat | Fiat |
| Model: | Tipo | Punto |
| Generation: | Tipo (160) | Punto II (188, facelift 2003) 3dr |
| Engine / modification: | 1.6 i.e. (90 Hp) | 1.2 (80 Hp) |
| Production start: | 1988 year | 2003 year |
| Production end: | 1991 year | 2007 year |
| Coupe type: | Hatchback | Hatchback |
| Num. of Doors: | 3 | |
| Num. of seats: | 5 | |
| Fuel consumption / economy - urban: | 7.6 l/100 km | |
| Fuel consumption / economy - extra urban: | 5.0 l/100 km | |
| Fuel consumption / economy - combined: | 6.0 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Drag coefficient: | 0.32 | |
| Fuel tank volume: | 47 l | |
| Emission standard: | Euro 4 | |
| Power: | 90 hp | 80 hp |
| Max power in: | 5000 rpm. | |
| Maximum speed: | 172 km/h | |
| Acceleration from 0 to 100 km/h: | 11.4 sec | |
| Torque: | 114 Nm @ 4000 rpm. | |
| Model Engine: | 188A5000 | |
| Engine position: | Front, transverse | |
| Engine displacement: | 1242 cm3 | |
| Engine oil capacity: | 2.8 l | |
| Coolant: | 4.5 l | |
| Fuel System: | Multi-point injection | |
| Position of cylinders: | Inline | |
| Number of cylinders: | 4 | |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 10.6 | |
| Piston Stroke: | 78.9 mm | |
| Cylinder Bore: | 70.8 mm | |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (manual transmission): | 5 | |
| Length: | 3840 mm | |
| Width: | 1660 mm | |
| Height: | 1480 mm | |
| Wheelbase: | 2460 mm | |
| Front track: | 1398 mm | |
| Rear (Back) track: | 1392 mm | |
| Minimum volume of Luggage (trunk): | 264 l | |
| Maximum amount of Luggage (trunk): | 1080 l | |
| Front suspension: | The depreciated rack | |
| Rear suspension: | Torsion | |
| Max weight: | 1430 kg | |
| Front brakes: | Disc | |
| Rear brakes: | Drum | |
| Kerb Weight: | 920 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Power steering: | Electric Steering | |
| Minimum turning circle (turning diameter): | 10.5 m | |
| Tire size: | 165/70 R14 |