Comparison Fiat Linea 1.3 16V Multijet (90 Hp) & Jiangling Yuhu 2.4i (136 Hp) AWD
Add car |
Remove car |
Remove car |
| Brand: | Fiat | Jiangling |
| Model: | Linea | Yuhu |
| Generation: | Linea | Yuhu |
| Engine / modification: | 1.3 16V Multijet (90 Hp) | 2.4i (136 Hp) AWD |
| Production start: | 2007 year | 2016 year |
| Production end: | 2012 year | |
| Coupe type: | Sedan | Pick-up |
| Num. of Doors: | 4 | 4 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 6.5 l/100 km | |
| Fuel consumption / economy - extra urban: | 4 l/100 km | |
| Fuel consumption / economy - combined: | 4.9 l/100 km | |
| Fuel Type: | Diesel | Petrol (Gasoline) |
| Fuel tank volume: | 45 l | 68 l |
| Emission standard: | EURO IV | |
| Power: | 90 hp | 136 hp |
| Max power in: | 4000 rpm. | |
| Maximum speed: | 170 km/h | 160 km/h |
| Acceleration from 0 to 100 km/h: | 13.8 sec | |
| Torque: | 200 Nm/1750 rpm. | 200 Nm |
| Model Engine: | 4G69 | |
| Engine position: | Front, transverse | |
| Engine displacement: | 1248 cm3 | 2400 cm3 |
| Fuel System: | Diesel Commonrail | Multi-point injection |
| Aspiration / Turbine: | Turbocharging | |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | OHC | |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 4 | 4 |
| Compression ratio: | 17.6 | |
| Piston Stroke: | 82 mm | |
| Cylinder Bore: | 69.6 mm | |
| Wheel Drive: | Front wheel drive | All wheel drive (4x4) |
| Number of Gears (manual transmission): | 5 | 5 |
| Length: | 4560 mm | 5325 mm |
| Width: | 1946 mm | 1828 mm |
| Height: | 1494 mm | 1745 mm |
| Wheelbase: | 2603 mm | |
| Front track: | 1473 mm | 1530 mm |
| Rear (Back) track: | 1466 mm | 1530 mm |
| Ride height(clearance): | 225 mm | |
| Minimum volume of Luggage (trunk): | 500 l | |
| Front suspension: | The depreciated rack | |
| Rear suspension: | Torsion | |
| Front brakes: | Ventilated discs | Ventilated discs |
| Rear brakes: | Drum | Drum |
| Kerb Weight: | 1185 kg | 2580 kg |
| ABS: | yes | yes |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 10 m | 13.4 m |
| Tire size: | 185/65 R15 | 235/70 R16 |
| Wheel rims size: | R16 |