Comparison Fiat Bravo II 2.0 Multijet (165 Hp) & Mazda 121 III (JASM,JBSM) 1.3 (60 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Fiat | Mazda |
| Model: | Bravo | 121 |
| Generation: | Bravo II | 121 III (JASM,JBSM) |
| Engine / modification: | 2.0 Multijet (165 Hp) | 1.3 (60 Hp) |
| Production start: | 2008 year | 1996 year |
| Production end: | 2012 year | 2000 year |
| Coupe type: | Hatchback | Hatchback |
| Num. of Doors: | 5 | 3/5 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 6.9 l/100 km | 7.6 l/100 km |
| Fuel consumption / economy - extra urban: | 4.3 l/100 km | 4.9 l/100 km |
| Fuel consumption / economy - combined: | 5.3 l/100 km | 6.8 l/100 km |
| Fuel Type: | Diesel | Petrol (Gasoline) |
| Fuel tank volume: | 57 l | 42 l |
| Emission standard: | Euro 5 | |
| CO2 emissions: | 139 g/km | |
| Power: | 165 hp | 60 hp |
| Max power in: | 4000 rpm. | 5000 rpm. |
| Maximum speed: | 215 km/h | 155 km/h |
| Acceleration from 0 to 100 km/h: | 8.2 sec | 15.9 sec |
| Torque: | 360 Nm @ 1750 rpm. | 103 Nm/2500 rpm. |
| Model Engine: | 198A8000 | |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 1956 cm3 | 1299 cm3 |
| Engine oil capacity: | 4.9 l | |
| Coolant: | 7 l | |
| Fuel System: | Diesel Commonrail | Mono-point injection |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | DOHC | OHC |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 4 | 2 |
| Compression ratio: | 16.5 | 9.5 |
| Piston Stroke: | 90.4 mm | 75.5 mm |
| Cylinder Bore: | 83 mm | 74 mm |
| Wheel Drive: | Front wheel drive | Front wheel drive |
| Number of Gears (automatic transmission): | - | |
| Number of Gears (manual transmission): | 6 | 5 |
| Length: | 4336 mm | 3828 mm |
| Width: | 1792 mm | 1634 mm |
| Height: | 1498 mm | 1330 mm |
| Wheelbase: | 2600 mm | 2446 mm |
| Front track: | 1538 mm | 1429 mm |
| Rear (Back) track: | 1532 mm | 1384 mm |
| Minimum volume of Luggage (trunk): | 400 l | 250 l |
| Maximum amount of Luggage (trunk): | 1175 l | |
| Front suspension: | Independent, Spring McPherson, with stabilizer | The depreciated rack |
| Rear suspension: | Semi-dependent beam with stabilizer lateral stability | Wishbone |
| Max weight: | 1870 kg | 1460 kg |
| Front brakes: | Ventilated discs | Disc |
| Rear brakes: | Disc | Drum |
| Kerb Weight: | 1360 kg | 930 kg |
| ABS: | yes | yes |
| Steering type: | Steering rack and pinion | Steering rack and pinion |
| Power steering: | Electric Steering | Hydraulic Steering |
| Minimum turning circle (turning diameter): | 10.4 m | |
| Permitted trailer load with brakes (12%): | 1300 kg | |
| Permitted trailer load without brakes: | 500 kg | |
| Tire size: | 225/45 R17 | 165/70R13 |
| Wheel rims size: | R17 |