Comparison Fiat 500X Cross/City Cross (facelift 2019) 2.0 MultiJet II (150 Hp) AWD Automatic & Toyota Venza 3.5 (268 Hp) Automatic
Add car |
Remove car |
Remove car |
| Brand: | Fiat | Toyota |
| Model: | 500 | Venza |
| Generation: | 500X Cross/City Cross (facelift 2019) | Venza |
| Engine / modification: | 2.0 MultiJet II (150 Hp) AWD Automatic | 3.5 (268 Hp) Automatic |
| Production start: | 2018 year | 2008 year |
| Production end: | 2019 year | |
| Coupe type: | SUV | Off-road vehicle |
| Num. of Doors: | 5 | 5 |
| Num. of seats: | 5 | 5 |
| Fuel Type: | Diesel | Petrol (Gasoline) |
| Fuel tank volume: | 55 l | 67 l |
| Emission standard: | Euro 6 d-TEMP | |
| Power: | 150 hp | 268 hp |
| Max power in: | 4000 rpm. | |
| Maximum speed: | 196 km/h | |
| Acceleration from 0 to 100 km/h: | 10.1 sec | |
| Torque: | 350 Nm @ 1500 rpm. | 334 Nm/4700 rpm. |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 1956 cm3 | 3456 cm3 |
| Fuel System: | Diesel Commonrail | Multi-point injection |
| Aspiration / Turbine: | Turbocharger | |
| Position of cylinders: | Inline | V engine |
| Valvetrain: | DOHC | |
| Number of cylinders: | 4 | 6 |
| Number of valves per cylinder: | 4 | 4 |
| Compression ratio: | 16.5 | |
| Piston Stroke: | 90.4 mm | |
| Cylinder Bore: | 83 mm | |
| Wheel Drive: | All wheel drive (4x4) | Front wheel drive |
| Number of Gears (automatic transmission): | 9 | 6 |
| Length: | 4269 mm | 4801 mm |
| Width: | 1796 mm | 1905 mm |
| Width including mirrors: | 2025 mm | |
| Height: | 1603 mm | 1610 mm |
| Wheelbase: | 2570 mm | 2276 mm |
| Front track: | 1631 mm | |
| Rear (Back) track: | 1636 mm | |
| Ride height(clearance): | 174 mm | |
| Minimum volume of Luggage (trunk): | 350 l | |
| Maximum amount of Luggage (trunk): | 1000 l | |
| Front suspension: | McPherson | |
| Rear suspension: | Independent, spring | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| Kerb Weight: | 1495 kg | 1835 kg |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 11.05 m |